BFHBM - 742516 ENAMEL ALKYD GLOSS BLUE 15102
- MSDS: BFHBM
- Manufacturer: PRATT AND LAMBERT
- Product Name: 742516 ENAMEL ALKYD GLOSS BLUE 15102
- National Stock Number: 8010-00-597-7844
Product Identification
Product ID:742516 ENAMEL ALKYD GLOSS BLUE 15102
MSDS Date:01/01/1985
FSC:8010
NIIN:00-597-7844
MSDS Number: BFHBM
Responsible Party
Emergency Phone: 316-733-1361
Cage: PRATT
Contractor
Telephone: 216-566-2902
Cage: 61196
Ingredients
MINERAL SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 45%
ACGIH TLV: 500 PPM
TRIETHYLAMINE (SARA III)
CAS: 121-44-8
RTECS: YE0175000
Fraction By Weight: <0.5%
OSHA PEL 25 PPM/15 STEL
ACGIH TLV: 10 PPM/15 STEL; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ETHYL KETOXIME
RTECS: PM7783000
ISOBUTYL ALCOHOL (SARA III)
CAS: 78-83-1
RTECS: NP9625000
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:INHAL:ANESTHETIC.IRRITATION OF NOSE, THROAT,
EYES & POSSIBLE DIZZINESS & NAUSEA.
First Aid
First Aid:INHAL:REMOV FR EXPOSR & PROVIDE FRESH AIR. SPLASH EYES:FLUSH
IMMED. W/LG AMTS OF WATR F/15 MIN. SPLASH SKIN:REMOV CONTAM
CLOTHING & WASH ALL AFFECTED AREA W/WATR. INGESTION:DO NOT INDUCE
VOMITING. CON SULT A PHYSICIAN IMMED. IN ALL CASES.
Fire Fighting
Flash Point:104F 40C TCC
Extinguishing Media:CO*2,DRY CHEM OR ALCOH FOAM.POLYMR FOAM PREFER F/LG
FIRES.
Fire Fighting Procedures:SELF-CONTND BREATHING APPARAT SHLD BE AVAIL
F/FIREMEN.
Unusual Fire/Explosion Hazard:KP CONTNRS TIGHTLY CLOS.ISOLAT FR
HEAT,ELECTR EQPMT,SPARK & OPEN FLAME. CLOS CONTNRS MAY EXPLODE(SUP
Accidental Release
Spill Release Procedures:REMOV ALL SOURCES OF IGNIT (FLAMES, HOT
SURFACES & ELECTRICAL, STATIC OR FRICTIONAL SPARKS).VENTILA AREA &
AVOID BREATHING VAPORS. REMOV W/INERT ABSORBENT & NON-SPARKING
TOOLS.STEPS MUST BE TAKEN TO P REVENT CONTAMINATION OF GROUND WATER
ORSTREAMS.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTY
IN COMPLIANCE W/OSHA 1910.106. CONTNRS SHLD BE GROUNDED & BONDED TO
THE RECEIVING CONTAINER.
Other Precautions:DO NOT WELD OR CUT ON EMPTY CONTNRS. DO NOT USE UNTIL
ALL SAFETY PRECAUTIONS & MIXING DIRECTIONS HAVE BEEN READ & FULLY
UNDERSTOOD BY THE USER.
Exposure Controls
Respiratory Protection:MECH FILTR RESPIRAT TO REMOV SPRAY MIST &
ORGANIC VAPORS.
Ventilation:PROVID GEN DILUT/LOC EXHAUST,VENTILAT IN VOL TO KP BELO
TLV.
Protective Gloves:SOLVNT IMPERMEA
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:TO PREVENT SKIN CONTACT
Supplemental Safety and Health
UNUS. FIRE & EXPLOS. HAZ:WHEN EXPOSED TO EXTREME HEAT. DO NOT APPLY TO
VERY HOT SURFACES.
Chemical Properties
Boiling Pt:B.P. Text:311-373
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:61
Stability
Stability Indicator/Materials to Avoid:YES
AVD CONTCT W/STRONG ACIDS OR ALKALINE MATERIAL.
Stability Condition to Avoid:AVD FIRES, HEAT & HOT SURFACES.
Hazardous Decomposition Products:BURNING WILL PRODUCE SMOKE & OXIDES OF
CARBON
Conditions to Avoid Polymerization:DO NOT ADD DRIERS OR REACTIVE
CHEMICALS W/O TECH SUPERVISION
Disposal
Waste Disposal Methods:DISPOSE IN ACCORD W/LOCAL, STATE & FEDERAL
REGULATIONS. INCINERATE IN EPA APPRVD FACILITY. DO NOT INCINERATE
CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.