Product ID:741-460
MSDS Date:01/01/1985
FSC:8010
NIIN:00-597-7858
MSDS Number: BFHBX

Cage: 09869

Telephone: 714-529-4597

Cage: 09869

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: <42%

OSHA PEL 100 PPM

Effects of Overexposure:INHALE:AN ESTHETIC,IRRITATION OF RESPIRATORY
TRACT,ACUTE NERVOUS SYSTEM DEPRESSION CHARACTERIZED BY

First Aid:INCASE OF CONTACT,FLUSH SKIN AND EYES WITH PLENTY OF WATER
WHILE REMOVING CONTAMINATED CLOTHING.IF INHALED,REMOVE TO FRESH
AIR.CALL A PHYSCIAN IF SYMPTOMS PERSIST

Flash Point:86F,30C TCC
Lower Limits:1.1
Extinguishing Media:CARBON DIOXIDE/DRY CHEMICAL-SMALL;POLYMER
FOAM-LARGE FIRE
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AVAILABLE
FOR FIREMEN
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
EXPLODE DUE TO PRESSURE BUILD-UP

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION(FLAMES,HOT
SURFACES,AND ELECTRICAL,STATIC,OR FRICTIONAL SPARKS.)AVOID
BREATHING VAPORS.VENTILATE AREA.REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS ONE FLAMMABLE (OR COMBUSTIBLE) LIQUID
Other Precautions:DO NOT TAKE INTERNALLY,CONTAINERS SHOULD BE GROUNDED
WHEN POURING,AVOID FREE FALL IN EXCESS OF A FEW INCHES,DO NOT FLAME
CUT,BRAZE,OR WELD COATED MATERIAL WITHOUT VENTILATION

Respiratory Protection:APPROVED BUREAU OF MINES RESPIRATORS W/PROPER
FILTER OR HOOD
Ventilation:GENERAL DILUTION/LOCAL EXHAUST FOR TLV&LEL SAFETY& WELDING
Protective Gloves:ALOT OF CONTACT
Eye Protection:USE EYEWEAR IF SPLASHING
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING
Supplemental Safety and Health
BOILING PT. 155-189C EFFTS. OF OVEREXPOSURE-HEADACHE,DIZZINESS ETC OR
COMA.PRIMARY IRRITATION FOR SKIN OR EYE CONTACT

HCC:F3
Boiling Pt:B.P. Text:311-373F
Evaporation Rate & Reference:< ETHER
Percent Volatiles by Volume:59.7

Stability Condition to Avoid:FIRES,HEAT AND HOT SURFACES

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL,STATE,AND
FEDERAL REGULATIONS.INCINERATE IN APPROVED FACILITY.DO NOT
INCINERATE CLOSED CONTAINERS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.