BFHHC - 741-034

  • MSDS: BFHHC
  • Manufacturer: PRATT AND LAMBERT INC
  • Product Name: 741-034
  • National Stock Number: 8010-00-598-5460
Product Identification

Product ID:741-034
MSDS Date:01/01/1985
FSC:8010
NIIN:00-598-5460
MSDS Number: BFHHC

Responsible Party
PRATT AND LAMBERT INC
945 BURLINGTON
KANSAS CITY, MO 64141
US

Emergency Phone: 316-733-1361

Cage: 92216

Contractor
PRATT AND LAMBERT INC
206 KANSAS CITY, MO 64141 US

Cage: 92216

Ingredients

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 35.0%

OSHA PEL 100 PPM

Hazards

Effects of Overexposure:INHALED-ANESTHETIC, IRITATE AIRWAY; SKIN/EYE
IRRITATION HEADACHE, DIZZINESS, COMA, CONFUSION

First Aid

First Aid:INCASE OF CONTACT, FLUSH SKIN AND EYES WITH PLENTY OF WATER
WHILE REMOVING CONTAMINATED CLOTHING. IF INHALED, REMOVE TO FRESH
AIR, CALL A PHYSICIAN IF SYMPTONS PERSISTS. PERFORM ARTIFICIAL
RESPIRATION IF BREATHING HAS STOPPED.

Fire Fighting

Flash Point:104 F, 40 C TCC
Lower Limits:1.1
Extinguishing Media:CARBON DIOXIDE/DRY CHEMICAL-SMALL; POLYMER
FOAM-LARGE FIRE
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AVAILABLE
FOR FIREMENNED
Unusual Fire/Explosion Hazard:PRESSURE BUILD-UP FROM EXTREME HEAT MAY
CAUSE EXPLOSION. USE WATER TO COOL CANS;,FOR FIRE:FOGNOZZLES

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES, & ELECTRICAL, STATIC, OR FRICTIONAL SPARKS). AVOID
BREATHING VAPORS. VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS ONE FLAMMABLE (OR COMBUSTIBLE) LIQUID.
Other Precautions:DO NOT TAKE INTERNALLY, CONTAINERS SHOULD BE GROUNDED
WHEN POURING, AVOID FREE FALL IN EXCESS OF A FEW INCHES, DO NOT
FLAME CUT, BRAZE, OR WELD COATED MATERIAL WITHOUT VENTILATION.

Exposure Controls

Respiratory Protection:APPROVED BUREAU OF MINES RESPIRATORS W/ PROPER
FILTER OR HOOD.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST FOR TLV&LEL SAFETY & WELDING
Protective Gloves:ALOT OF CONTACT
Eye Protection:USE EYEWEAR IF SPLASHING
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health
BOILING RANGE 155-189 C

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:311-3730.F
Evaporation Rate & Reference:< ETHER
Appearance and Odor:BROWN POINT
Percent Volatiles by Volume:60.0

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:FIRES, HEAT, & HOT SURFACES, SPARKS,
ELECTRICAL EQUIPMENT

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.