BFHMF - XYLENE, TT-X-916

  • MSDS: BFHMF
  • Manufacturer: RANDOLPH PRODUCTS CO
  • Product Name: XYLENE, TT-X-916
  • National Stock Number: 6810-00-598-6600
Product Identification

Product ID:XYLENE, TT-X-916
MSDS Date:08/01/1987
FSC:6810
NIIN:00-598-6600
MSDS Number: BFHMF

Responsible Party
RANDOLPH PRODUCTS CO
PARK PLACE EAST
CARLSTADT, NJ 07072
US

Emergency Phone: 201-438-3700

Cage: 77672

Contractor
RANDOLPH PRODUCTS CO
830 CARLSTADT, NJ 07072-0830 US

Telephone: 201-438-3700

Cage: 77672

Ingredients

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:4300 MG/KG (RTECS)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CNS EFFECTS, ORGAN DAMAGE, IRRITATION.
Effects of Overexposure:EYE:IRRITATION, REDNESS, TEARING, BLURRED
VISION. SKN:IRRITATION, DEFAT, DERMATITIS. INHALATION:URT
IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE,
UNCONSCIOUSNESS, ASPHYXIATION. INGESTION :GI TRACT IRRITATION,
NAUSEA, VOMITING,DIARRHEA.
Medical Cond Aggravated by Exposure:ANY PREEXISTING ORGAN DAMAGE OR
DYSFUNCTION.

First Aid

First Aid:EYE:FLUSH 15 MINUTES W/AMPLE WATER. SKIN:REMOVE CONTAMINATED
CLOTHING. WASH THOROUGHLY W/SOAP & WATER. INHALATION:REMOVE TO
FRESH AIR, GIVE OXYGEN OR ARTIFICIAL RESPIRATION AS REQUIRED.
INGESTION:DO N OT INDUCE VOMITING. IF CONSCIOUS, GIVE ONE QUART
WARM WATER. CALL PHYSICIAN IMMEDIATELY ALL CASES. TRY TO DETERMINE
DOSAGE AMOUNT RECEIVED.

Fire Fighting

Flash Point Method:TCC
Flash Point:=26.7C, 80.F
Lower Limits:1.2
Extinguishing Media:FOAM, CO*2, SAND
Fire Fighting Procedures:USE SCBA PP MODE WHEN FIGHTING FIRES.COOL
FIRE-EXPOSED CONTAINERS W/WATER SPRAY TO REDUCE FLAMMABLE VAPOR
EMISSION.VAPORS CAN MIGRATE TO REMOTE IGNITION SOURCE
Unusual Fire/Explosion Hazard:VAPORS ARE FLAMMABLE, CAN EXPLODE.
SPRAYS/MISTS MAY IGNITE AT TEMPERATURES BELOW FLASHPOINT (80F).

Accidental Release

Spill Release Procedures:EVACUATE AREA,REMOVE ALL HEAT & IGNITION
SOURCES,STOP LEAK/SPILL SOURCE IF POSSIBLE. WEAR ALL LISTED
PROTECTIVE GEAR. LIMIT VAPOR EMISSION W/ALCOHOL FOAM. DIKE SPILL
AREA,COLLECT W/SHOVEL OR ABSORBENT ,PLACE IN CLOSABLE CONTAINER.
Neutralizing Agent:NONE

Handling

Handling and Storage Precautions:AVOID EXCESS HEAT & IGNITION SOURCES.
GROUND CONTAINERS WHEN POURING.
Other Precautions:DO NOT CUT OR WELD UNPURGED CONTAINERS.

Exposure Controls

Respiratory Protection:USE SCBA PP MODE IF USED IN ELEVATED TEMPERATURE
OR MIST-FORMING CONDITIONS.
Ventilation:GENERAL MECHANICAL
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL GOGGLES, FACE MASK
Other Protective Equipment:APRON, FACE PROTECTION
Work Hygienic Practices:USE GOOD PERSONAL HYGIENE PRACTICES.
Supplemental Safety and Health
ENTRY PER MSDS DATED AUG 87.

Chemical Properties

HCC:F3
Boiling Pt:=137.8C, 280.F
Vapor Pres:25
Vapor Density:>1 (AIR=1)
Spec Gravity:0.86
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:NEG
Appearance and Odor:CLEAR,COLORLESS LIQUID,AROMATIC ODOR
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:EXCESS HEAT, IGNITION SOURCES
Hazardous Decomposition Products:CARBON OXIDES

Disposal

Waste Disposal Methods:RECLAIM OR INCINERATE IAW ALL LAWS &
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.