BFHYC - RED #11105
- MSDS: BFHYC
- Manufacturer: AMERON INDUSTRIAL COATINGS DIV
- Product Name: RED #11105
- National Stock Number: 8010-00-616-7486
Product Identification
Product ID:RED #11105
MSDS Date:01/01/1987
FSC:8010
NIIN:00-616-7486
MSDS Number: BFHYC
Responsible Party
Emergency Phone: 316-733-1361
Cage: 09869
Contractor
Telephone: 714-529-4597
Cage: 09869
Ingredients
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 50.0%
OSHA PEL 100 PPM
LEAD CHROMATE (OSHA PEL FOR LEAD FROM 29CFR
CAS: 7758-97-6
RTECS: GB2975000
Fraction By Weight: 3.0%
OSHA PEL 0.05 MG/M3 (PB)
ACGIH TLV: 0.05MG/M3(CR)A2;8990
Hazards
Effects of Overexposure:ANESTHETIC, IRR. OF RESPIRATORY TRACT OR ACUTE
NERVOUS SYS. DEPRESSION, EYE & SKIN IRRITATION
First Aid
First Aid:IN CASE OF CONTACT FLUSH SKIN AND EYES WITH WATER AND REMOVE
CONTAMINATED CLOTHING. IF INHALED REMOVED TO FRESH AIR. CALL A
PHYSICIAN IF CONDITIONS PERSIST.
Fire Fighting
Flash Point:85F TCC
Lower Limits:1.1
Extinguishing Media:SMALL FIRES-CARBON DIOXIDE OR DRY CHEM. LARGE
FIRES-FOAM
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS FOR FIREMEN
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
EXPLODE
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. REMOVE WITH INERT ABSORBENT AND NON-SPARKING
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED FOR STORAGE OF NFPA CLASS ONE
FLAMMABLES.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED PAINT RESPIRATOR OR AIR
SUPPLIED RESPIRATOR
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST AS NECESSARY
Supplemental Safety and Health
RESPIRATOR USE BASED ON CHEM CON. AND CONDITION OF USE
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:311-373F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:62.5
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRE,HEAT AND HOT SURFACES
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL,STATE AND
FEDERAL EGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.