BFJBK - A-164A

  • MSDS: BFJBK
  • Manufacturer: KOPPERS COMPANY INC
  • Product Name: A-164A
  • National Stock Number: 8010-00-616-9143
Product Identification

Product ID:A-164A
MSDS Date:01/01/1985
FSC:8010
NIIN:00-616-9143
MSDS Number: BFJBK

Responsible Party
KOPPERS COMPANY, INC

Emergency Phone: 213-726-8666

Cage: EO463

Contractor
KOPPERS COMPANY, INC.
VERNON, CA 90040 US

Cage: EO463

Ingredients

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ALIPHATIC HYDROCARBONS

ACGIH TLV: 130 PPM


BUTANOL

RTECS: EK8750000

ACGIH TLV: 50 PPM

Hazards

Effects of Overexposure:VAPORS- 50PPM IRRITATE EYES,NOSE&THROAT. HIGHER
CONC-DROWSINESS,DIZZINESS FOLLOWED BY COMA.

First Aid

First Aid:VAPORS-REMOVE TO FRESH AIR. IF NOT BREATHING GIVE ARTIFICIAL
RESPIRATION. CALL DOCTOR. SKIN-WASH THOROUGHLY W SOAP - WATER.
EYES-FLUSH W LGE AMTS WATER FOR 15 MIN.-GET MEDICAL AID.
INGESTION-DO NOT IN DUCE VOMITING.CALL DOCTOR IMMEDIATELY

Fire Fighting

Flash Point:67F, 19C TCC
Extinguishing Media:WATER, FOG, DRY CHEM OR CO2
Fire Fighting Procedures:AIR SUPPLIED EQUIP/ENCLOSED AREA, COOL FULL
CONTAINERS/WATER
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HEAT, SPARK OR OPEN FLAME

Accidental Release

Spill Release Procedures:RECOVER ALL POSSIBLE, THEN WIPE UP W RAGS,
SAWDUST, ETC. REMOVE ALL SOURCES OF IGNITION.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED. AVOID FLAMES,
WELDING, SMOKING,SPARKS, OPEN LIGHT, ETC.
Other Precautions:MAINTAIN GOOD PERSONAL HYGIENE. DO NOT USE IN
CONFINED AREAS, TANK OR PIT WO ADEQUATE VENTILATION.

Exposure Controls

Ventilation:LOCAL & MECHANICAL
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Supplemental Safety and Health

Chemical Properties

HCC:V3
Vapor Density:>AIR
Spec Gravity:10.5
Evaporation Rate & Reference:SLOW
Solubility in Water:SLIGHT
Appearance and Odor:TYPICAL PAINT ODOR
Percent Volatiles by Volume:53.4

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:IN ACCORD W LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.