BFJMX - 80-1300-0141
- MSDS: BFJMX
- Manufacturer: 3M
- Product Name: 80-1300-0141
- National Stock Number: 8040-00-629-5707
Product Identification
Product ID:80-1300-0141
MSDS Date:01/01/1985
FSC:8040
NIIN:00-629-5707
MSDS Number: BFJMX
Responsible Party
Emergency Phone: (612)733-1110
Cage: 0F0U5
Contractor
Telephone: NONE
Cage: 0F0U5
Ingredients
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: >50%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
DIGLYCIDYL ETHER OF BISPHENOL A
CAS: 1675-54-3
RTECS: TX3800000
Fraction By Weight: <50%
ACGIH TLV: NONE
CARBON BLACK
RTECS: FF5250000
Fraction By Weight: 2%
ACGIH TLV: 3.5 MG/CUM
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 2%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
EPICHLOROHYDRIN (SARA III)
CAS: 106-89-8
RTECS: TX4900000
OSHA PEL S, 5 PPM
ACGIH TLV: S, 2 PPM; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Effects of Overexposure:DIRECT CONTACT CAN CAUSE DERMATITIS&
SENSITIZATION UPON CHRONIC EXPOSURE,TESTICULAR ATROPHY (SUPPL)
First Aid
First Aid:INHALATION:IF IRRITATION&DIFFICULT BREATHING
OCCUR,DISCONTINUE EXPOSURE&SEEK MEDICAL ATTENTION EYE CONTACT:FLUSH
WITH WATER FOR 15 MINUTES,SEEK MEDICAL ATTENTION,SKIN CONTACT:WASH
WITH SOAP&WATER.DO N OT USE SOLVENTS TO REMOVE RESIN OR CATALYST
Fire Fighting
Flash Point:450F/232C
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CO*2,DRY CHEMICAL,FOAM
Fire Fighting Procedures:USE PRESSURE DEMAND SCBA FOR FIRE FIGHTING
Unusual Fire/Explosion Hazard:NA
Accidental Release
Spill Release Procedures:REACT SPILLED RESIN WITH CATALYST& ALLOW TO
CURE,PROVIDE ADEQUATE VENTILATION,DO NOT USE SOLVENTS TO CLEAN UP
SPILLS
Handling
Handling and Storage Precautions:STORE IN COOL DRY AREA,PREVENT
COMMINGLING OF RESIN&CATALYST
Other Precautions:WASH HANDS FREQUENTLY WITH SOAP&WATER,REMOVE
SENSITIVE INDIVIDUALS FROM EXPOSURE.AVOID MECHANICAL ABRASION&DUST
GENERATION OF CURED RESIN,THIS WILL RELEASE ENCAPSULATED TALC&
PIGMENTS
Exposure Controls
Respiratory Protection:NIOSH APPROVED OV CHEM CART;SA IF
EPICHLOROHYDRIN EXCEEDS TLV
Ventilation:LEV RECOMMENDED TO MAINTAIN VAPOR CONCENTRATION BELOW TLVS
Protective Gloves:BUTYL RUBBER
Eye Protection:SAFETY GLASSES(MINIMUM)
Other Protective Equipment:EYEWASH,BARRIER CREAMS
Supplemental Safety and Health
IF TALC IS FIBROUS,USE AS ASBESTOS TLV,RESPIRABLE FRACTION SHOULD NOT
EXCEED 2 MG/CUM.HEALTH EFFECTS,CONT...&HEMPOIETIC CHANGES HAVE BEEN
NOTED IN ANIMALS,SEE NIOSH CIB #29 PUBLICATION 79-104
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:NA
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:1.66
Evaporation Rate & Reference:NA
Solubility in Water:NA
Appearance and Odor:RED,VISCOUS LIQUID
Percent Volatiles by Volume:NA
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS,ACIDS,CAUSTICS,ZINC,ALUMINUM
Hazardous Decomposition Products:CO,CO*2,NO*X,EPICHLOROHYDRIN
Disposal
Waste Disposal Methods:CONTACT DPDO FOR DISPOSAL INFORMATION
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.