Product ID:SEALER EC-1293A
MSDS Date:01/01/1985
FSC:8030
NIIN:00-655-4753
MSDS Number: BFJYX

AC & S DIVISION, 3M COMPANY

Emergency Phone: 612-733-1110

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

LEAD PEROXIDE (LEAD DIOXIDE), (OSHA PEL FROM 29CFR

CAS: 1309-60-0

RTECS: OG0700000

Fraction By Weight: 43%

OSHA PEL 0.05 MG/M3 (PB)

ACGIH TLV: 0.15 MG/M3(PB); 8990

CALCIUM OXIDE

CAS: 1305-78-8

RTECS: EW3100000

Fraction By Weight: 22%

OSHA PEL 5 MG/M3

ACGIH TLV: 2 MG/M3; 9192

XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 2%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

DIGLYCIDAL ETHER OF BISPHENOL A EPOXY RESIN (W/STEAR

CAS: 1675-54-3

RTECS: TX3800000

STEARIC ACID

CAS: 57-11-4

RTECS: WI2800000

Effects of Overexposure:EYE IRRITATION UPON DIRECT CONTACT. SKIN
IRRITATION UPON PROLONGED CONTACT.

First Aid:EYES: FLUSH IMMEDIATELY WITH WATER FOR 15 MIN. CALL PHYSICIAN
IF IRRITATION PERSIST. SKIN: WASH THOROUGHLY BEFORE EATING OR
SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. INGESTION:
CALL PHYSICI AN.

Flash Point:200F; 93C,
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:COLLECT SPILLED MATERIAL. CLEAN UP RESIDUE &
PLACE IN METAL CONTAINER. USE ABSORBENT MATERIAL AS NEEDED IN
CLEANUP PROCEDURE. OBSERVE PRECAUTIONS & USE SPECIAL PROTECTION.

Other Precautions:WASH HANDS THOROUGHLY BEFORE EATING OR SMOKING. KEEP
AWAY FROM FOOD OR FEED PRODUCTS. AVOID SKIN CONTACT.

Ventilation:MECH VENT RECOMND TO KEEP < TLV. VENT CURING OVENS
OUTDOORS.
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
OTHER INGRED: FATTY ACID BODYING AGENT. PART A OF TWO PART KIT.
CONTAINER SIZE- 1 QT KIT.

HCC:N1
Spec Gravity:2.2
Solubility in Water:V. SLIGHT
Appearance and Odor:DARK BROWN PASTE
Percent Volatiles by Volume:2

Stability Indicator/Materials to Avoid:YES
REDUCING AGENTS & OTHER OXIDIZABLE MATERIALS.
Hazardous Decomposition Products:CO, CO*2 & SMOKE PARTICLES IN
EXCESSIVE HEAT OR FLAME.

Waste Disposal Methods:MANUFACTURER RECOMMENDS COMMERCIAL INCINERATION
WITH DESTRUCTION & REMOVAL EFFICIENCY > 99.99% OR RECLAMATION.
PRODUCT HAS AN EPA HAZARDOUS WASTE NUMBER OF D008 (LEAD). DISPOSAL
METHODS MUST BE IAW FE DERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.