BFKPB - VV-L-825A,TYPE 3

  • MSDS: BFKPB
  • Manufacturer: DAVIS HOWLAND OIL CORP
  • Product Name: VV-L-825A,TYPE 3
  • National Stock Number: 9150-00-664-4448
Product Identification

Product ID:VV-L-825A,TYPE 3
MSDS Date:01/01/1985
FSC:9150
NIIN:00-664-4448
MSDS Number: BFKPB

Responsible Party
DAVIS-HOWLAND OIL CORPORATION

Emergency Phone: (716)473-6650

Cage: FO626

Contractor
DAVIS-HOWLAND OIL CORPORATION
ROCHESTER, NY 14607 US

Telephone: (716) 473-6650

Cage: FO626

Ingredients

PETROLEUM HYDROCARBONS (ACGIH TLV CAN BE USED AS OIL MIST

Fraction By Weight: 100%

Hazards

Effects of Overexposure:PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE
MILD SKIN IRRITATION.

First Aid

First Aid:IN CASE OF SKIN CONTACT,WASH WITH SOAP & WATER IF SPLASHED
INTO EYES,FLUSH WITH CLEAR WATER UNTIL IRRITATION SUBSIDES.

Fire Fighting

Flash Point:475F(C.OC.)
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:USE AIR-SUPPLIED RESCUE EQUIPMENT FOR ENCLOSED
AREAS.
Unusual Fire/Explosion Hazard:DO NOT STORE OR MIX WITH STRONG OXIDANTS

Accidental Release

Spill Release Procedures:RECOVER FREE LIQUID.ADD ABSORBENT TO SPILL
AREA. KEEP PETROLEUM PRODUCTS OUT OF STREAMS & WATER-WAYS.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED. KEEP AWAY FROM
HEAT & OPEN FLAMES.
Other Precautions:AVOID BREATHING OF OIL MIST. REMOVE OIL IMPREGNATED
CLOTHING.WASH THOROUGHLY AFTER/EXPOSURE.

Exposure Controls

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN Protective Gloves:AS REQUIRED
Eye Protection:OPTIONAL
Other Protective Equipment:OIL-IMPERVIOUS
Supplemental Safety and Health
MSDS IS UNDATED

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:700F
Vapor Pres:<.1
Vapor Density:>17
Spec Gravity:0.90
Evaporation Rate & Reference:<0.01 (N-BUT AC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK COLORED LIQUID. MILD PETROLEUM ODOR.
Percent Volatiles by Volume:NEGL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS LIKE CHLORINE & CONCENTRATED OXYGEN.
Stability Condition to Avoid:NONE SPECIFIED
Hazardous Decomposition Products:CARBON MONOXIDE IN THE CASE OF
INCOMPLETE COMBUSTION

Disposal

Waste Disposal Methods:THE ABSORBED MATERIAL CAN BE INCINERATED BY
FOLLOWING LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.