BFKPH - MIL-P-698A

Export as PDF
Product Identification

Product ID:MIL-P-698A
MSDS Date:01/01/1987
FSC:8010
NIIN:00-664-4743
MSDS Number: BFKPH

Responsible Party
TRIAD PAINT AND CHEMICAL CORP
810 EVERGREEN AVE
BROOKLYN, NY 11207-1140
US

Cage: 33151

Contractor
TRIAD PAINT AND CHEMICAL CORP
BROOKLYN, NY 11207-1140 US

Cage: 33151

Ingredients

PIGMENTS

Fraction By Weight: 20.5%


CATALYST


VEHICLE


SOLVENTS

Fraction By Weight: 37.5%

ACGIH TLV: 200 PPM


ADDITIVES

Hazards

Effects of Overexposure:SKIN,EYE
IRRITANT,ANESTHESIA,HEADACHE,DIZZINESS,NAUSE,ETC.

First Aid

First Aid:SKIN CONTACT-WASH WITH MILD SOAP AND WATER.EYE CONTACT FLUSH
EYES WITH PLENTY OF WATER.INHALATION-REMOVE TO FRESH AIR,RESTORE
BREATHING IF REQUIRED.

Fire Fighting

Flash Point:111F,44C TCC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM,CO*2,STEAM,WATER FOG,DRY CHEMICAL
Fire Fighting Procedures:EXCLUDE AIR,DO NOT USE WATER,CONSULT FIRE
MARSHAL
Unusual Fire/Explosion Hazard:VAPOR FORMS EXPLOSIVE MIXTURE W/AIR
BETWEEN UPPER AND LOWER EXPLOSIVE LIMITS.

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES.VENTILATE AREA

Handling

Handling and Storage Precautions:AVOID IGNITION SOURCES,SPLASH
FILLING,EXCESSIVE HEAT.PROVIDE ADEQUATE VENTILATION.

Exposure Controls

Respiratory Protection:ORGANIC CANNISTER MASK OR AIR PACK
Ventilation:MECHANICAL W/APPROVED CLASS D EXPLOSION PROOF MOTORS/SWITCH
Protective Gloves:NOT REQUIRED
Eye Protection:GOGGLES,SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:323F,162C
Vapor Pres:1
Vapor Density:5.0
Spec Gravity:0.777
Evaporation Rate & Reference:< BUTYL ACETATE
Solubility in Water:NEGLIGIBLE
Percent Volatiles by Volume:56

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO CO*2 WHEN COMBUSTED

Disposal

Waste Disposal Methods:EVAPORATE OR FLUSH WITH WATER IN A WELL
VENTILATED AREA.USE OIL SEWER IF AVAILABLE OR REMOVE TO A
CONTAINER

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.