BFLLM - MICCROSOL,BLACK,S-2003
- MSDS: BFLLM
- Manufacturer: MICHIGAN CHROME AND CHEMICAL CO
- Product Name: MICCROSOL,BLACK,S-2003
- National Stock Number: 8030-00-682-6746
Product Identification
Product ID:MICCROSOL,BLACK,S-2003
MSDS Date:01/01/1987
FSC:8030
NIIN:00-682-6746
MSDS Number: BFLLM
Responsible Party
Emergency Phone: 313-267-5211
Cage: 01058
Contractor
Cage: 01058
Ingredients
DI-SEC-OCTYL PHTHALATE (DI-2-ETHYLHEXYL-PHTHALATE) (SARA
CAS: 117-81-7
RTECS: TI0350000
Fraction By Weight: 41%
OSHA PEL 5 MG/M3/10 STEL
ACGIH TLV: 5 MG/M3; 9192
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Effects of Overexposure:PRLG CONTACT W/SKIN CAN CAUSE SKIN IRRIT.DOP IN
PLASTISOL MAY BE CARCINOGENIC.
First Aid
First Aid:SKIN:WIPE CLEAN WITH CLOTH & WASH THOROUGHLY WITH SOAP &
WATER.EYES:FLUSH W/WATER.CALL MD.
Fire Fighting
Flash Point:N/R(PER MFR)
Extinguishing Media:CO*2,DRY CHEM,FOAM,WATER SPRAY
Fire Fighting Procedures:SAME AS OIL OR PAINT.SCBA RECOMMENDED
Unusual Fire/Explosion Hazard:INTENSE HEAT WILL GENERATE BLACK CHOKING
SMOKE,HCL GAS, AND CO.
Accidental Release
Spill Release Procedures:ABSORB ON DIATOMACEOUS EARTH OR OTHER INERT
FILLERS. SHOVEL INTO DRUMS.
Handling
Handling and Storage Precautions:AVOID EXCESSIVE STORAGE
TEMPERATURES.DO NOT STORE IN DIRECT SUNLIGHT.KEEP AWAY FROM
MOISTURE.
Exposure Controls
Respiratory Protection:NONE UNDER PROPERLY VENTILATED AREA
Ventilation:LOCAL EXHAUST FROM CURING OVEN
Protective Gloves:LATEX OR RUBBER
Eye Protection:CHEM GOGGLES
Supplemental Safety and Health
MSDS PERP:86064.CALLED MFR TO FIND FL PT (NONE - NON-FLAMMABLE) AND
TYPE OF GLOVES.ADDITIONAL INGREDIENT:ADHESION PROMOTOR (2%).NIOSH
#1000609AP.
Chemical Properties
HCC:T7
Spec Gravity:1.18
Evaporation Rate & Reference:N/K(PER MFR)
Solubility in Water:INSOLUBLE
Appearance and Odor:BLACK VISCOUS LIQUID W/TYPICAL VINYL ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS,WATER
Hazardous Decomposition Products:HCL GAS,CO
Disposal
Waste Disposal Methods:APPROVED LANDFILL OR INCINERATION AS PER
LOCAL,STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.