Product ID:G697,DIMETHYLPOLYSILOXANE
MSDS Date:10/21/1985
FSC:6850
NIIN:00-702-4297
MSDS Number: BFLYD

GENERAL ELECTRIC CO., SILICONE PRODUCT DIV.

HUDSON RIVER ROAD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Cage: 01139

PHIPPS PRODUCTS CORP

BOSTON, MA 02111-2403 US

Telephone: OUT OF BUSINESS

Cage: 86511

DIMETHYLPOLYSILOXANE

CAS: 9016-00-6

RTECS: TQ2690000

Fraction By Weight: >95%

ACGIH TLV: NOT SPECIFIED

NAPHTA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: <5.0%

OSHA PEL 100 PPM

Effects of Overexposure:INGEST:GASTRIC
DISTRESS;SKIN:IRRITATION;EYES:IRRITATION

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Flash Point:>500F/260C TOC
Extinguishing Media:EXTINQUISH W. AGENT SUITABLE FOR SURROUNDING FIRE.
Fire Fighting Procedures:MOVE CONTAINERS W/O RISK. WEAR SCBA,
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:WIPE OR SCRAP UP AND PLACE IN CONTAINER FOR
DISPOSAL.WASH WALKING SURFACES WITH DETERGENT AND WATER TO REDUCE
SLIPPING HAZARD.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED,LOW
FIRE RISK AREA. PROTECT FROM PHYSICAL DAMAGE.KEEP CONTAINERS
CLOSED. MAINTAIN STANDARD HYGIENE FOR CHEM HANDLING
Other Precautions:AVOID CONTACT WITH SKIN AND EYES. USE EYE WASH IF
NEEDED.

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Supplemental Safety and Health
MSDS DATED 10/21/85

HCC:N1
Vapor Pres:NEG
Vapor Density:NEGL
Spec Gravity:1.032
Evaporation Rate & Reference:NEGL
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PASTE OR SOLID,SLIGHT ODOR, OFF-WHITE
Percent Volatiles by Volume:1.0

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:HIGH TEMPERATURES,IGNITION SOURCES
Hazardous Decomposition Products:CO, CO*2,S10*2,ZINC METAL FUMES.

Waste Disposal Methods:MATERIALL NOT REGULATED PER 40CFR PART
261.DISPOSE IN ACCORDANCE WITH APPLICABLE STATE,LOCAL & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.