BFNTX - PLIBOND 30

Product Identification

Product ID:PLIBOND 30
MSDS Date:01/01/1987
FSC:8040
NIIN:00-764-4424
MSDS Number: BFNTX

Responsible Party
GOODYEAR TIRE & RUBBER CO
1144 E MARKET ST
AKRON, OH 44316-0001
US

Cage: DO805

Contractor
GOODYEAR TIRE AND RUBBER CO
AKRON, OH 44316-0001 US

Telephone: 330-796-1906/613-996-66669(CANADA)

Cage: 73842

Ingredients

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 60 - 65%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:IRRITATION OF EYE,NOSE & THROAT.HEADACHE,NAUSEA
& NARCOSIS POSSIBLE AT HIGH VAPOR CONCENTRATIONS

First Aid

First Aid:INHALATION-REMOVE TO FRESH AIR.EYE CONTACT-FLUSH EYES WITH
PLENTY OF WATER FOR AT LEAST 15 MIN.CALL DOCTOR.SKIN-WASH WITH SOAP
& WATER.

Fire Fighting

Flash Point:26F;-3.3C TOC
Lower Limits:2
Upper Limits:12
Extinguishing Media:CO*2,DRY CHEMICAL;FOAM
Fire Fighting Procedures:TREAT AS SOLVENT FIRE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:PROVIDE ADEQUATE VENTILATION;TAKE PRECAUTIONS
AGAINST ALL SOURCES OF IGNITION.SCOOP BULK OF MATERIAL INTO
CONTAINER FOR DISPOSAL.CLEAN UP WITH RAGS AND SOLVENTS

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
FLAME.USE ONLY WITH ADEQUATE VENTILATION.AVOID PROLONGED BREATHING
OF VAPOR.AVOID SKIN OR EYE CONTACT.

Exposure Controls

Eye Protection:SAFETY GLASSES
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:176F,80C
Vapor Pres:71
Vapor Density:2.5
Spec Gravity:0.89
Solubility in Water:INSOLUBLE
Appearance and Odor:TAN LIQUID-KETONE ODOR
Percent Volatiles by Volume:60

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Hazardous Decomposition Products:CARBON COMBUSTION PRODUCTS;NITROGEN
COMPOUNDS

Disposal

Waste Disposal Methods:INCINERATE OR ALLOW SOLVENT TO EVAPORATE AND
DISPOSE OF SOLIDS IN LANDFILL

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.