BFPCH - THINNER
- MSDS: BFPCH
- Manufacturer: CHEMICAL COMMODITIES AGENCY INC
- Product Name: THINNER
- National Stock Number: 8010-00-778-4281
Product Identification
Product ID:THINNER
MSDS Date:01/01/1987
FSC:8010
NIIN:00-778-4281
MSDS Number: BFPCH
Responsible Party
HIGHLAND, CA 92346-2640
US
Emergency Phone: 714-864-2310
Info Phone: 714-864-2310
Cage: 60777
Contractor
Telephone: 909-864-2310
Cage: 60777
Ingredients
KETONES(TYPE NOT SPECIFIED)
ACGIH TLV: 200PPM
AROMATICS
ACGIH TLV: 100PPM
ALCOHOL
ACGIH TLV: 200PPM
ALIPHATICS
ACGIH TLV: 200PPM
Hazards
Effects of Overexposure:ANESTHESIA,HDACH,NAUSEA,DIZZINESS.MODERATELY
IRRITATING TO SKIN & EYES.
First Aid
First Aid:REMOV PATIENT TO FRESH AIR & RESTORE BREATHING IF REQD.REMOVE
CONTAM FROM SKIN W/PLENTY OF SOAP & WATER.FOR EYES:FLUSH W/WATER
FOR AT LEAST 15 MIN. & GET IMMEDIATE MEDICAL ATTENTION.
Fire Fighting
Flash Point:72F 22C
Extinguishing Media:CO*2,ALCOHOL FOAM,DRY CHEM
Fire Fighting Procedures:HANDLE AS EXTREMELY FLAMBL LIQUID.
Unusual Fire/Explosion Hazard:DO NOT HEAT THIS PRODUCT. DO NOT USE NEAR
OPEN FLAME.
Accidental Release
Spill Release Procedures:REMOV LG QUANTITIES WITH VACUUM TRUCK. SMALL
QUANTITIES MAY BE ABSORBED IN VERMICULITE OR SAND & REMOVED W/NON
SPARKING TOOLS.
Handling
Handling and Storage Precautions:HANDLE AS AN EXTREMELY FLAMMABLE
LIQUID
Other Precautions:KEEP AWAY FROM HEAT SPARKS & OPEN FLAMES.
Exposure Controls
Respiratory Protection:ORGANIC CANNISTER MASK OR AIR PACK AS REQUIRED
Ventilation:LOC EXHAUST-DESIRABLE MECHANICAL-RECOMMENDED
Protective Gloves:NORM.NOT NEEDED
Eye Protection:CONVENTNL-GURD AGNST SPLA
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:135-300F
Vapor Pres:80
Vapor Density:3.0
Spec Gravity:0.80
Solubility in Water:APPRECIABLE
Appearance and Odor:CLEAR, MOBILE LIQUID
Percent Volatiles by Volume:100%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:SPARKS & OPEN FLAME
Hazardous Decomposition Products:MAY RELEASE CO UPON COMBUSTION
Disposal
Waste Disposal Methods:CONTROLLED INCINERATION OR BURIAL IN APPRVD
LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.