BFPSL - WHITE #37875
- MSDS: BFPSL
- Manufacturer: HAAS CHEMICAL CORP
- Product Name: WHITE #37875
- National Stock Number: 8010-00-782-9356
Product Identification
Product ID:WHITE #37875
MSDS Date:01/01/1985
FSC:8010
NIIN:00-782-9356
MSDS Number: BFPSL
Responsible Party
Emergency Phone: 717-562-3800
Cage: OO150
Contractor
Telephone: 717 562-3800
Cage: OO150
Ingredients
SOLVENTS (NOT SPECIFIED)
Fraction By Weight: 50.3%
ACGIH TLV: 100 PPM
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 13.5%
OSHA PEL 1000 PPM
ACGIH TLV: ASPHYXIANT; 9192
ISOBUTANE
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: 16.5%
ACGIH TLV: 1000 PPM
Hazards
Effects of Overexposure:INHALATION-HEADACHE, NAUSEA, EYE IRRITATION.
First Aid
First Aid:REMOVE EXPOSED PERSON TO FRESH AIR. IF SWALLOWED, DO NOT
INDUCE VOMITING. CALL PHYSICIAN IMMEDIATELY. FLUSH CONTAMINATED
AREAS WITH WATER
Fire Fighting
Flash Point:-156 F+;-104 C
Lower Limits:2.2
Upper Limits:9.5
Extinguishing Media:USE NO WATER; USE CARBON DIOXIDE.
Fire Fighting Procedures:REMOVE ALL COMBUSTIBLE MATERIALS
Unusual Fire/Explosion Hazard:CONTAINERS MAY EXPLODE UPON HEATING ABOVE
130F. KEEP FROM HEAT OR FLAMES.
Accidental Release
Spill Release Procedures:AVOID BREATHING VAPORS, REMOVE ALL COMBUSTIBLE
MATERIALSCONTAIN SPILL. APPLY ABSORBENT MEDIA.
Handling
Handling and Storage Precautions:KEEP FROM HEAT AND SPARKS. AVOID
CONTACTING SKIN WITH VAPOR WHILE SPRAYING.
Exposure Controls
Ventilation:LOCAL-USE ADEQUATE VENTILATION.
Supplemental Safety and Health
Chemical Properties
HCC:V3
Boiling Pt:B.P. Text:-46 F;-43 C
Vapor Density:1.76
Spec Gravity:1.1
Solubility in Water:NRGLIGIBLE
Appearance and Odor:COLORED MATERIAL; SOLVENT ODOR.
Percent Volatiles by Volume:62.1
Stability
Stability Indicator/Materials to Avoid:NO
WATER
Stability Condition to Avoid:EXPOSURE TO TEMPERATURES ABOVE 130F.
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:DEPOSIT IN AIR-TIGHT CONTAINER. AVOID
PUNCTURING. DO NOT INCINERATE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.