BFPVW - MIL-P-38336
- MSDS: BFPVW
- Manufacturer: GROW GROUP INC U S PAINT DIV
- Product Name: MIL-P-38336
- National Stock Number: 8010-00-787-8856
Product Identification
Product ID:MIL-P-38336
MSDS Date:01/01/1985
FSC:8010
NIIN:00-787-8856
MSDS Number: BFPVW
Responsible Party
SAINT LOUIS, MO 63103-3043
US
Emergency Phone: 314-621-0525
Info Phone: 314-621-0525 / FAX 314-621-0722
Cage: 90608
Contractor
Telephone: 314-621-0525
Cage: 90608
Ingredients
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 24.0%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
2-ETHOXYETHANOL (EGEE) (SARA III)
CAS: 110-80-5
RTECS: KK8050000
Fraction By Weight: 12.0%
OSHA PEL S,200 PPM
ACGIH TLV: S, 5 PPM; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:EYE AND UPPER RESPIRATORY IRRITANT
First Aid
First Aid:IF EXPOSED TO EXCESS VAPOR,REMOVE TO FRESH AIR AND SEEK MED.
ATT.IF SLASHED ON SKIN OR IN EYES,FLUS W/LG AMT OF WATER & SEEK
IMMEDIATE MED ATT.IF INGESTED, DO NOT INDUCE VOMITING BUT SEEK
IMMED MEDICA L ATTN.
Fire Fighting
Flash Point:45 F TCC
Lower Limits:2.6
Extinguishing Media:DRY CHEMICAL OR FOAM
Unusual Fire/Explosion Hazard:DO NOT EXPOSE OR OPEN FLAME
Accidental Release
Spill Release Procedures:AFFECTED AREA SHOULD BE TREATED WITH AN
ABSORBING MATERIAL AND THEN PLACED IN A TIGHTLY CLOSED CONTAINER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM EXCESS HEAT, SPARKS,
AND FLAME.
Exposure Controls
Respiratory Protection:CHARCOAL BASE FOR SOLVENT VAPOR & NIOSH/MSHA
APPROVED
Ventilation:LOCAL EXHAUST-SUFFICIENT TO KEEP AIR SUPPLY BELOW TLV
Protective Gloves:RUBB OR POLYETH
Eye Protection:GOGGLES
Other Protective Equipment:HYPERSENSITIVE PERSONS SHOULD WEAR
PROTECTIVE CREAMS
Supplemental Safety and Health
VAPOR DENSITY IF HEAVIER THAN AIR.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:167 TO 279F
Vapor Pres:3.
Spec Gravity:1.01
Evaporation Rate & Reference:1.0 N-BUAC
Solubility in Water:APPRECIABLE
Appearance and Odor:OFF WHITE-ALCOHOL
Percent Volatiles by Volume:39.0
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:EXCESS HEAT
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:IN ACCORDANCE W/LOCAL STATE & FED CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.