BFPVW - MIL-P-38336

Product Identification

Product ID:MIL-P-38336
MSDS Date:01/01/1985
FSC:8010
NIIN:00-787-8856
MSDS Number: BFPVW

Responsible Party
GROW GROUP INC U S PAINT DIV
831 S 21ST ST
SAINT LOUIS, MO 63103-3043
US

Emergency Phone: 314-621-0525

Info Phone: 314-621-0525 / FAX 314-621-0722

Cage: 90608

Contractor
US PAINT CORPORATION
ST LOUIS, MO 63103-3092 US

Telephone: 314-621-0525

Cage: 90608

Ingredients

ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 24.0%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192


2-ETHOXYETHANOL (EGEE) (SARA III)

CAS: 110-80-5

RTECS: KK8050000

Fraction By Weight: 12.0%

OSHA PEL S,200 PPM

ACGIH TLV: S, 5 PPM; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:EYE AND UPPER RESPIRATORY IRRITANT

First Aid

First Aid:IF EXPOSED TO EXCESS VAPOR,REMOVE TO FRESH AIR AND SEEK MED.
ATT.IF SLASHED ON SKIN OR IN EYES,FLUS W/LG AMT OF WATER & SEEK
IMMEDIATE MED ATT.IF INGESTED, DO NOT INDUCE VOMITING BUT SEEK
IMMED MEDICA L ATTN.

Fire Fighting

Flash Point:45 F TCC
Lower Limits:2.6
Extinguishing Media:DRY CHEMICAL OR FOAM
Unusual Fire/Explosion Hazard:DO NOT EXPOSE OR OPEN FLAME

Accidental Release

Spill Release Procedures:AFFECTED AREA SHOULD BE TREATED WITH AN
ABSORBING MATERIAL AND THEN PLACED IN A TIGHTLY CLOSED CONTAINER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM EXCESS HEAT, SPARKS,
AND FLAME.

Exposure Controls

Respiratory Protection:CHARCOAL BASE FOR SOLVENT VAPOR & NIOSH/MSHA
APPROVED
Ventilation:LOCAL EXHAUST-SUFFICIENT TO KEEP AIR SUPPLY BELOW TLV
Protective Gloves:RUBB OR POLYETH
Eye Protection:GOGGLES
Other Protective Equipment:HYPERSENSITIVE PERSONS SHOULD WEAR
PROTECTIVE CREAMS
Supplemental Safety and Health
VAPOR DENSITY IF HEAVIER THAN AIR.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:167 TO 279F
Vapor Pres:3.
Spec Gravity:1.01
Evaporation Rate & Reference:1.0 N-BUAC
Solubility in Water:APPRECIABLE
Appearance and Odor:OFF WHITE-ALCOHOL
Percent Volatiles by Volume:39.0

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:EXCESS HEAT
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:IN ACCORDANCE W/LOCAL STATE & FED CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.