Product ID:5356
MSDS Date:01/01/1987
FSC:3439
NIIN:00-803-9498
MSDS Number: BFQCZ

J.B. ALLOY COMPANY

Emergency Phone: 713-941-6950

Cage: LO998

J.B. ALLOY COMPANY

230070 HOUSTON, TX 77011 US

Telephone: 713-926-3232

Cage: LO998

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

COPPER (CAS #7440-50-8)

RTECS: FL5325000

ACGIH TLV: 0.1 MG/CUM-FUME

IRON(III) OXIDE(CAS #1309-37-1)

ACGIH TLV: 5 MG/CUM(FUME)

MAGNESIUM OXIDE (CAS #1309-48-4)

RTECS: OM3840000

ACGIH TLV: 10 MG/CUM -FUME

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

Effects of Overexposure:FUMES:DIZZ,NAU,NOSE&EYE IRRIT,TIGHT
CHESS,FEVER,ALLERGIC REACT.ARC:INJURE EYES & BURN SKIN.

First Aid:RMV TO FRESH AIR,OBTAIN MED ATTN. EMPLOY FIRST AID TECHNIQUES
RECOMMENDED BY THE AMERICAN RED CROSS.

Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:NONE
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE
COMBUSTIBLES AND FLAMMABLES.

Handling and Storage Precautions:USE EXHAUST SYSTEM TO CLEAR WELDING
FUMES. MAKE SURE INHALED AIRE DOES NOT CONTAIN FUMES ABOVE
PERMISSIBLE EXPOSURE LEVEL.
Other Precautions:SEE AMERICAN STANDARD Z49,1-1983,SAFETY IN WELDING &
CUTTING AND THE WELDING HANDBOOK, VOL 1, CHAPTTER 9, SAFE PRACTIVES
IN WELDING AND CUTTING.

Respiratory Protection:USE RESP FUME RESPIRATOR/SCBA WHEN WELDING IN
CONFINED AREA.
Ventilation:LOCAL AT ARC & MECHANICAL TO KEEP FUMES FM WORKER'S AREA.
Protective Gloves:WELD'S LEATHER
Eye Protection:WELD'S HELMET W/DK LENSES
Other Protective Equipment:WEAR BODY
PROTECTORS(ARM,APRONS,HATS,SHOULDER PROTECTION.
Supplemental Safety and Health
MSDS NOT DATED. ELECTRIC SHOCK FM ARC WELDING CAN KILL.

HCC:N1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:ALUMINUM WELDING WIRE
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:METAL FUMES, TOXIC
GASES,CO*2,CO,NITROGEN OXIDES

Waste Disposal Methods:DISCARD ANY PRODUCT RESIDUE,DISPOSABLE CONTAINER
OR LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL
COMPLIANCE W/FEDERAL,STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.