Product ID:90
MSDS Date:01/01/1987
FSC:3439
NIIN:00-819-4005
MSDS Number: BFQTH

ERICO PRODUCTS, INC.

Emergency Phone: 216-248-0100

Cage: FO421

ERICO PRODUCTS, INC.

SOLON, OH 44139 US

Telephone: (216) 248-0100

Cage: FO421

COPPER (I) OXIDE (CAS #1317-39-1) (70-77%)

CAS: 1317-39-1

RTECS: GL8050000

Fraction By Weight: 73.5%

ACGIH TLV: 1 MG/CUM (DUST)

ALUMINUM/COPPER ALLOY (CAS #12608-74-1) (13-16%)

Fraction By Weight: 14.5%

ACGIH TLV: 1 MG/CUM (DUST)

CALCIUM FLUORIDE

CAS: 7789-75-5

RTECS: EW1760000

Fraction By Weight: 2%

OSHA PEL 2.5 MG/M3 (F)

ACGIH TLV: 2.5 MG/M3 (F); 8990

CALCIUM-SILICON ALLOY (CAS #37236-74-1) (1-3%)

Fraction By Weight: 2%

ACGIH TLV: 2 MG/CUM

Effects of Overexposure:BURNS FM CONTACT W/REACTION/REACT PRODUCTS.
DUST IRRIT TO EYES,RESP TRACT, METAL FUME FEVER.

First Aid:RMV TO FRESH AIR. GIVE CPR/OXYGEN IF REQD. FLUSH EYES W/LG
AMT WATER FOR 15 MIN. GET MED ATTN. TREAT BURNS IN NORMAL MANNER,
GET MED ATTN.

Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:NONE
Extinguishing Media:DRY SAND OR LG AMT OF WATER (FLOOD)(1 GL PER TUBE)
Fire Fighting Procedures:WEAR SCBA & PROTECT CLOTHING
Unusual Fire/Explosion Hazard:SELF-PROPAGATING, HIGH TEMP REACT, GEN
MOLTEN METAL,SLAG, & DENSE DUSTY SMOKE. HAZ FUMES FM PLASTIC.

Spill Release Procedures:ALL UNUSED,SPILLED MATERIALS MAY BE SWEPT UP
FOR DISPOSAL.

Handling and Storage Precautions:MATL SHOULD BE KEPT DRY AND STORED IN
"NO SMOKING OR OPEN FLAME" AREA. RESTRICTION TO AUTHORIZED
PERSONNEL IS RECOMMENDED.
Other Precautions:FOR ADDITIONAL INFO, SEE AM NATL STD, SAFETY IN
WELDING & CUTTING Z49.1 & INSTRUCTIONS PROVIDED WITH MOLDS.

Respiratory Protection:NONE NORMALLY REQD.
Ventilation:AS REQD TO MAINTAIN LEVELS < TLV
Protective Gloves:WELDERS LEATHER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:LEATHER APRON, WELDING EQUIPMENT.
Supplemental Safety and Health
MSDS DATED 1/30/86.

HCC:N1
Spec Gravity:5.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRANULAR PARTICLES, NO ODOR
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
MOISTURE OR GAS PRODUCING CONTAMINTS DURING EXOTHERMIC REACT
Stability Condition to Avoid:TEMP ABOVE IGNITION.
Hazardous Decomposition Products:NONE

Waste Disposal Methods:DISPOSE I/A/W ALL LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.