BFQWC - ISOPROPANOL
- MSDS: BFQWC
- Manufacturer: UNION CARBIDE CORP
- Product Name: ISOPROPANOL
- National Stock Number: 6810-00-822-7637
Product Identification
Product ID:ISOPROPANOL
MSDS Date:01/01/1987
FSC:6810
NIIN:00-822-7637
MSDS Number: BFQWC
Responsible Party
DANBURY, CT 06817-0001
US
Emergency Phone: 800-822-4357
Info Phone: 800-822-4357
Cage: 61637
Contractor
Telephone: 800-822-4357/732-563-5522 (MSDS)
Cage: 61637
Ingredients
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 100%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
Hazards
Effects of Overexposure:INHAL-GIDDINESS; MAY IRRITATE SKIN & EYES
W/PROLONGED EXPOSURE
First Aid
First Aid:INHAL-MOVE TO FRESH AIR. INGEST-INDUCE VOMITING & CALL A
PHYSICIAN. FLUSH SKIN & EYE CONTACT WITH WATER.
Fire Fighting
Flash Point:53F/12.3C/CC
Autoignition Temp:Autoignition Temp Text:750F
Lower Limits:2
Upper Limits:12
Extinguishing Media:SMALL-CARBON DIOXIDE,DRY CHEM. LGE-ALC-TYPE FOAM
Fire Fighting Procedures:DILUTE BURNING LIQ W/22-25 VOL H*2O WILL
EFFECT EXTINGUISHMT
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. SMALL
SPILLS SHOULD BE FLUSHED W/LARGE QUANTITIES OF WATER. LARGE SPILLS
SHOULD BE COLLECTED FOR DISPOSAL.
Handling
Handling and Storage Precautions:WARNING-FLAMMABLE. KEEP AWAY FROM HEAT
& OPEN FLAME. KEEP CONTAINER CLOSED. USE WITH ADEQUATE VENTILATION.
DO NOT TAKE INTERNALLY.
Other Precautions:FOR INDUSTRIAL USE ONLY.
Exposure Controls
Respiratory Protection:AIR-SUPPLIED MASK IN CONFINED AREA
Ventilation:LOCAL EXHAUST PREFERRED
Protective Gloves:RUBBER/VINYL
Eye Protection:GOGGLES
Other Protective Equipment:READY ACCESS TO EYE BATH & SAFETY SHOWER
Supplemental Safety and Health
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:180F/82.3C
Vapor Pres:33
Vapor Density:2.07
Spec Gravity:0.7861
Evaporation Rate & Reference:2.3(BUTYL ACETATE1
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS,TRANSPARENT LIQ.,ODOR-ALCOHOL/ACET MIX
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
ANHYDRIDES,MONOMERS & ORGANOMETALLIC CONTAMINATION.
Stability Condition to Avoid:HEAT,SPARKS & OPEN FLAMES
Hazardous Decomposition Products:THERMAL DECOMP MAY PRODUCE CARBON
MONOXIDE &/OR CO*2
Disposal
Waste Disposal Methods:ATOMIZE INTO AN INCINERATOR WHERE APPROPRIATE
FED, STATE & LOCAL REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.