BFRQY - FUNGICIDAL INSULATION VARNISH

  • MSDS: BFRQY
  • Manufacturer: FULLER O'BRIEN CORP
  • Product Name: FUNGICIDAL INSULATION VARNISH
  • National Stock Number: 5970-00-832-6950
Product Identification

Product ID:FUNGICIDAL INSULATION VARNISH
MSDS Date:06/03/1974
FSC:5970
NIIN:00-832-6950
MSDS Number: BFRQY

Responsible Party
FULLER-O'BRIEN CORP.
450 EAST GRAND AVENUE
SOUTH SAN FRANCISCO, CA 94080-6207

Emergency Phone: 415-761-2300

Info Phone: 415-761-2300

Cage: 3W855

Contractor
O BRIEN CORPORATION
SOUTH SAN FRANCISCO, CA 94080-6207 US

Cage: 72556

Ingredients

N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 32%

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


2-METHOXYETHANOL (EGME) (SARA III)

CAS: 109-86-4

RTECS: KL5775000

Fraction By Weight: 19%

OSHA PEL S, 25 PPM

ACGIH TLV: S, 5 PPM; 9192


SALICYLANILIDE

CAS: 87-17-2

RTECS: VN7850000

Fraction By Weight: 3.8%


DICHLORODIFLUOROMETHANE (SARA III)

CAS: 75-71-8

RTECS: PA8200000

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS & SYMPTOMS OF OVEREXPOSURE.
Effects of Overexposure:NAUSEA,VOMITING,RINGING IN
EARS,DIZZINESS,HEADACHE,CONFUSION,RAPID PULSE & BREATHING,SWEATING.
Medical Cond Aggravated by Exposure:NONE NOTED.

First Aid

First Aid:EYES:FLUSH WITH WATER FOR 15 MINUTES.SEE DOCTOR;SKIN:REMOVE
CONTAMINATED CLOTHING & FLUSH SKIN WITH WATER;INHALATION:REMOVE TO
FRESH AIR.SYMPTOMS WILL DISAPPEAR.TOXIC HAZARD IS RATED AS
LOW;INGESTION: SEE DOCTOR.

Fire Fighting

Flash Point:78F(26C)
Lower Limits:1.4
Extinguishing Media:DRY CHEMICAL,CO*2,FOAM
Fire Fighting Procedures:DO NOT USE WATER ON BURNING LIQUID. WEAR SCBA
& PROTECTIVE CLOTHING. COOL FIRE EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:VAPORS HEAVIER THAN AIR. CAN TRAVEL A
LONG DISTANCE & FLASHBACK.

Accidental Release

Spill Release Procedures:ABSORB IN INERT MATERIAL & PLACE IN
APPROPRIATE DISPOSAL COVERED METAL CONTAINER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED TIGHTLY WHEN NOT
IN USE. DO NOT STORE ABOVE 120F.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR FOR SPRAY
APPLICATION.
Ventilation:LOCAL EXHAUST OR OPEN AIR.
Protective Gloves:RECOMMENDED FOR PROLONGED EXPOSURE.
Eye Protection:GOGGLES RECOMMENDED FOR PROLONGED EXPSRE
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:244-290F
Decomp Temp:Decomp Text:700F(371C)
Vapor Density:>1
Spec Gravity:0.98
Evaporation Rate & Reference:<1 (ETHER=1)
Appearance and Odor:LIQUID
Percent Volatiles by Volume:51

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS
Stability Condition to Avoid:HEAT,SPARKS,OPEN FLAMES
Hazardous Decomposition Products:NITROGEN OXIDES,CO,CO*2,INCOMPLETELY
BURNED CARBON PRODUCTS.

Disposal

Waste Disposal Methods:DISPOSE OF IAW FEDERAL,STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.