BFSSQ - TT-C-530A, COATING CMPD, RUST INIBITIVE
- MSDS: BFSSQ
- Manufacturer: EVERSEAL MANUFACTURING CO INC
- Product Name: TT-C-530A, COATING CMPD, RUST INIBITIVE
- National Stock Number: 8030-00-852-8013
Product Identification
Product ID:TT-C-530A, COATING CMPD, RUST INIBITIVE
MSDS Date:01/01/1985
FSC:8030
NIIN:00-852-8013
MSDS Number: BFSSQ
Responsible Party
RIDGEFIELD, NJ 07657-2329
US
Cage: EO432
Contractor
Telephone: 201-943-4986
Cage: 72988
Ingredients
ZINC CHROMATE
CAS: 13530-65-9
RTECS: GB3290000
Fraction By Weight: 5%.
OSHA PEL 0.1 MG/M3 (CRO3)
ACGIH TLV: 0.01MG/M3(CR)A1;9192
ALKYD RESIN
Fraction By Weight: 17%.
PHENOLIC VARNISH
Fraction By Weight: 3%.
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 22%.
OSHA PEL 100 PPM
LEAD DRIER (OSHA PEL FROM 29CFR 1910.1025)
OSHA PEL 0.05 MG/M3 (PB)
ACGIH TLV: 0.15 MG/M3 (PB);8990
Hazards
Effects of Overexposure:INHAL OF HIGH VAPOR CONC MAY HAVE RESULTS
RANGING FROM MILD DEPRESSN TO CONVULSIONS & LOSS OF CONSC.
First Aid
First Aid:INHAL: REMOVE FROM EXPOSURE IMMED. CALL MD. IF NECESSARY
START RESUSCITATN, ADMINISTER O*2. INGEST: DO NOT INDUCE VOMITING.
CALL MD. SKIN: REMOVE CONTAMINATED CLOTHING, WASH SKIN W/SOAP &
WATER. EYES: IMMED FLUSH W/WATER AT LEAST 15 MIN. CALL MD.
Fire Fighting
Flash Point:105F TAG CC
Lower Limits:0.9
Upper Limits:6.0
Extinguishing Media:EXCLUDE AIR-USE FOAM, CO*2, STEAM, DRY CHEMICALS
Fire Fighting Procedures:DO NOT USE WATER EXCEPT FOR COOLING EFFECT.
Unusual Fire/Explosion Hazard:WEAR SELF-CONTAINED BREATHING APPARATUS.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES. EVACUATE AREA.
RECOVER FREE LIQUID. ADD ABSORBENT TO SPILL AREA. VENTILATE
ENCLOSED SPACES. OPEN ALL WINDOWS & DOORS. KEEP PETROLEUM PRODUCTS
OUT OF STREAMS & WATERWAYS.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED. KEEP FROM
HEAT, SPARKS, AND OPEN FLAMES. USE ONLY W/ADEQUATE VENTILATION. NO
SMOKING OR OPEN LIGHTS.
Other Precautions:AVOID PROLONGED/REPEATED CONTACT W/SKIN. DOT
CLASSIFICATION+ COMBUSTIBLE LIQUID.
Exposure Controls
Ventilation:LOCAL EXH-FACE VELOCITY 60 FPM. MECH-EXPLSN-PROOF EQUIP.
Protective Gloves:NORM.NOT NEEDED
Eye Protection:NORMALLY NOT NEEDED
Other Protective Equipment:HYDROCARBON INSOLUBLE APRON.
Supplemental Safety and Health
PRODUCT CONTAINS 23% J20 RED IRON OXIDE, 65 DIATOMACEOUS EARTH 499, 12%
FISH OIL.
Chemical Properties
Boiling Pt:B.P. Text:326 TO 387F
Vapor Pres:5.
Vapor Density:4.9
Spec Gravity:1.25
Evaporation Rate & Reference:0.1 N-BUTYL ACET.
Solubility in Water:NEGLIGIBLE
Percent Volatiles by Volume:3.9
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS LIKE LIQUID CHLORINE & CONCENTRATED O*2.
Hazardous Decomposition Products:CO IN THE CASE OF INCOMPLETE
COMBUSTION.
Disposal
Waste Disposal Methods:INCINERATE ABSORBED MATEERIAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.