BFSVP - SYNTHOLVAR SHH,120/210,302,200
- MSDS: BFSVP
- Manufacturer: VARFLEX CORP
- Product Name: SYNTHOLVAR SHH,120/210,302,200
- National Stock Number: 5970-00-854-6713
Product Identification
Product ID:SYNTHOLVAR SHH,120/210,302,200
MSDS Date:10/01/1985
FSC:5970
NIIN:00-854-6713
MSDS Number: BFSVP
Responsible Party
ROME, NY 13440
US
Emergency Phone: 315-336-4400
Info Phone: 315-336-4400
Cage: 79074
Contractor
Telephone: 315-336-4400
Cage: 79074
Ingredients
PLASTICIZED POLYVINYL CHLORIDE RESIN
ADDITIVES (INCLUDES 5% PIGMENTS)
CAS: 24937-78-8
Fraction By Weight: 5.5%
ADDITIVES
Fraction By Weight: <0.5%
ACGIH TLV: NOT SPECIFIED
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: NONE SPECIFIED BY MANUFACTURER.
CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:MATERIAL IS NOT CONSIDERED AS A
CARCINOGEN BY NTP, IARC OR OSHA
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:IF VAPORS FROM HIGH TEMPERATURES ARE INHALED, REMOVE TO FRESH
AIR.
Fire Fighting
Autoignition Temp:Autoignition Temp Text:NONE
Extinguishing Media:WATER,CO*2,DRY CHEMICAL;FOAM
Fire Fighting Procedures:NO SPECIAL REQUIREMENTS.
Unusual Fire/Explosion Hazard:HYDROGEN CHLORIDE GAS LIBERATED DURING
COMBUSTION AND AT 500F AND ABOVE.
Handling
Handling and Storage Precautions:DO NOT EXPOSE TO SUNLIGHT. STORE BELOW
70 DEG. F.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NONE REQUIRED.
Ventilation:MECHANICAL(GENERAL) RECOMMENDED.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Work Hygienic Practices:WASH AND SHOWER NORMALLY AT THE END OF A
WORKDAY.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:N1
Decomp Temp:Decomp Text:>500F,>260C
Spec Gravity:1.19-1.41
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR PLASTIC INSULATION SLEEVING, 100 FOOT SPOOL.
NO ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
DIRECT CONTACT WITH SILVER AND COPPER UNDER CERTAIN CONDITIONS CAN
CAUSE CORROSION.
Stability Condition to Avoid:TEMPERATURES OVER 400F.
Hazardous Decomposition Products:HYDROGEN CHLORIDE GAS IS LIBERATED
DURING COMBUSTION AND AT 500F OR HIGHER.
Disposal
Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.