BFSYD - TT-E-516 #31136 RED (PART OF KIT NO K341)

Product Identification

Product ID:TT-E-516 #31136 RED (PART OF KIT NO K341)
MSDS Date:01/01/1985
FSC:5410
NIIN:00-856-1758
MSDS Number: BFSYD

Responsible Party
CADILAC PAINT & VARNISH CO,INC
409 ELIOT ST
ASHLAND, MA 01721-2359
US

Emergency Phone: NONE

Cage: JO926

Contractor
CADILLAC PAINT AND VARNISH CO INC
389 ASHLAND, MA 01721-2359 US

Cage: 4A257

Ingredients

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 16.2%

OSHA PEL 100 PPM


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 14.2%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 0.2%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

Hazards

Effects of Overexposure:INHAL-ANESTHETIC,IRRIT RESPIR TRACT,CNS
DEPRESS,DIZZINESS,CONFUSION,UNCONSCIOUS,COMA.IRRIT SKIN/EYES

First Aid

First Aid:REMOVE FROM EXPOSURE.RESTORE BREATHING.KEEP WARM/QUIET.NOTIFY
MD.FLUSH EYES W/WATER FOR 15 MIN.SKIN-FLUSH W/WATER.REMOVE
CONTAMINATED CLOTHING.CONSULT PHYSICIAN FOR DIFINITIVE TREATMENT.

Fire Fighting

Flash Point:53 F
Lower Limits:1.0
Extinguishing Media:CARBON DIOXIDE,DRY POWDER,FOAM (USE NFPA CL B EXT
FOR CL II)
Fire Fighting Procedures:WATER SPRAY INEFFECTIVE.USE WATER FOG TO COOL
EXPOS CONTAIN
Unusual Fire/Explosion Hazard:CONTAINERS MAY EXPLODE IF EXPOSED TO HEAT
KEEP FROM HOT SURFACES.

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES.AVOID BREATHING
VAPORS.VENTILATE AREA.REMOVE WITH INERT ABSORBENT & NON-SPARKING
TOOLS.

Handling

Handling and Storage Precautions:KEEP FROM HEAT,SPARKS,FLAME.AVOID
PROLONGED CONTACT.
Other Precautions:DO NOT INTERNALLY.GROUND CONTAINERS WHEN
POURING.AVOID FREE FALL OF LIQ MORE THAN FEW INCHES.DO NOT FLAME
CUT,BRAZE OR WELD W/O BUMINES APPD RESPIRATOR OR APPROPRIATE
VENTILATION.

Exposure Controls

Respiratory Protection:EXT.-MECH FILTER.INT.-CHEMICAL MECH FILTER.O2
MASK IN RESTRICT AREAS
Ventilation:PROV GEN DILUT OR EXHAUST VENT TO KEEP BELOW TLV.
Protective Gloves:WHEN DESIRED
Eye Protection:WHEN DESIRED
Other Protective Equipment:USE FOR PROLONGED OR REPEATED CONTACT.
Supplemental Safety and Health
MFR MSDS DATE-FEB 1983.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:243-293 F
Vapor Density:>1
Spec Gravity:1.20
Evaporation Rate & Reference:<1,ETHER
Appearance and Odor:LIQUID
Percent Volatiles by Volume:42.6

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL,STATE OR
FEDERAL REGULATIONS.DO NOT INCINERATE IN CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.