BFTKP - 9440345 BRAKE ASSEMBLY
- MSDS: BFTKP
- Manufacturer: GOODYEAR AEROSPACE CORP
- Product Name: 9440345 BRAKE ASSEMBLY
- National Stock Number: 1630-00-874-7274
Product Identification
Product ID:9440345 BRAKE ASSEMBLY
MSDS Date:01/01/1987
FSC:1630
NIIN:00-874-7274
MSDS Number: BFTKP
Responsible Party
Emergency Phone: 216-796-2121
Cage: EO533
Contractor
Telephone: 216-796-2800
Cage: 25500
Ingredients
ASBESTOS, CHRYSOTILE
CAS: 12001-29-5
RTECS: CI6478500
OSHA PEL 0.2 FIBERS/CC
ACGIH TLV: 2 FIBERS/CC; A1;9192
PHENOL-FORMALDEHYDE RESIN (CAS # 9003-35-4) (% 15-20)
ACGIH TLV: N/E
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 2-7%
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 2-7%
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
PARTICULATES NOT OTHERWISE REGULATED (NUISANCE DUST)
OSHA PEL 15 MG/M3 TOTAL DUST
ACGIH TLV: 10 MG/M3 TDUST; 8990
Hazards
Effects of Overexposure:ASBESTOS FB & LEAD PARTICLES IN ABRASION DUST.
ACUTE: NO ADVERSE HEALTH EFTS KNOWN. (SEE SUPP DATA)
First Aid
First Aid:EYES:FLUSH W/PLENTY OF H*2O FOR @ LEAST 15 MIN.IF IRRIT SEE
PHYSICIAN.SKIN:WASH W/SOAP + H*2O.INHAL:RMV TO FRESH AIR.GET MED
ADVICE.INGEST:CALL PHYSICIAN.OTHER:IF NECESS,CHANGE CLTHG TO AVOID
CARRYING DUST PARTICLES TO OTHER ENVIRONMENTS.
Fire Fighting
Fire Fighting Procedures:USE SCBA. COMBUSTION PRODUCTS OF THIS MATL MAY
BE TOXIC
Accidental Release
Spill Release Procedures:VACUUM/WET CLEAN IF DUST IS INVOLVED. VACUUM
SYSTEM SHOULD BE EQUIPPED W/OUTLET HEPA FILTER TO PVNT
REINTRODUCING ASBESTOS FIBERS & LEAD PARTICULATES TO ATMOSPHERE.
Handling
Handling and Storage Precautions:HANDLE TO MINIMIZE FORM/RETENTION OF
DUST.HANDLE CHEM TO PVNT EYE CONT & EXCESS/RPTD SKIN CONT. USE APP
EYE & SKIN PROT. AVOID INHAL OF DUST & VAPORS.
Other Precautions:NE=NOT ESTB.ASBESTOS & LEAD COMPONENTS LOCKED IN
PHENOLIC RESIN SYS.AS MFD,COMPONENTS ARE NO HAZ BUT WHEN RESIN SYS
ABRADED,DUST PRODUCED.ASBESTOS FB & LEAD PARTICLES POSS RELEASE &
AIRBORNE.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPRVD RESPIRATOR FOR ASBESTOS &
TOXIC PARTICULATES.
Ventilation:LOCAL EXHAUST VENT IF HIGH CONC OF DUST BY MECH ABRASION.
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:FULL FACE SHIELD
Supplemental Safety and Health
CHRONIC(OVEREXP TO AIRBORNE CONC):ASBESTOS-POSS
ASBESTOSIS,MESOTHELIOMA,INCR LUNG CANCER RISK W/COMB OF SMKG +
INHAL OF FB.LEAD DUST-POSS LEAD POISONG(ANEMIA EARLY SYMPTOM) + HAZ
TO FETUS.
Chemical Properties
HCC:T6
Spec Gravity:N/E
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK BROWN SOLID
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:DUST HANDLED AS HAZ AIR POLLUTANT IAW 40 CFR 61
SUBPART M PERTAINING TO ASBESTOS.USE LANDFILLS APPRVD FOR ASBESTOS
DISPOSAL.SCRAP PARTS NOT FRIABLE & NOT RESTRICTED UNDER AIR
POLLUTION REG.DISPOSE IAW FEDERAL,STATE,LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.