BFTZH - BE SQUARE 195 WHITE AND AMBER
- MSDS: BFTZH
- Manufacturer: PETROLITE CORP BARECO DIV
- Product Name: BE SQUARE 195 WHITE AND AMBER
- National Stock Number: 9160-00-890-3883
Product Identification
Product ID:BE SQUARE 195 WHITE AND AMBER
MSDS Date:01/01/1987
FSC:9160
NIIN:00-890-3883
MSDS Number: BFTZH
Responsible Party
TULSA, OK 74112-6618
US
Emergency Phone: (918)836-1601
Preparer: DGSC-SSH
Cage: 89331
Contractor
Telephone: 918-836-1601
Cage: 89331
Ingredients
MICROCRYSTALLINE WAX (FOOD GRADE) (USE TLV AS N.DUST
ACGIH TLV: 10MG/CUM(N.DUST
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS
Effects of Overexposure:HIGH CONC.OF WAX FUMES MAY CAUSE EYE,NOSE
RESPIRATORY IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR, GIVE CPR/O*2 I
NEEDED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;ING:RINSE MOUTH;
GET MEDICAL ATTEN FOR EYES,BREATHING DIFFICULTY,OR OTHER SYMPTOMS
OF OVER EXPOSURE.A BURN FR OM MOLTEN WAX SHOULD BE TREATED AS A
THERMAL BURN
Fire Fighting
Flash Point Method:COC
Flash Point:>500F/260C
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL AND WATER
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA.
Unusual Fire/Explosion Hazard:WHEN FINELY DIVIDED AND SUSPENDED IN
AIR,THESE PRODUCTS COULD BE FLAMMABLE;USE CARE,AWAY FROM HEAT.
Accidental Release
Spill Release Procedures:USE PROPER PERSONAL PROTECTION;IF H
LIQUID,ATTEMPT TO CONFINE SPILL AND LET THE WAX SOLIDIFY;ONCE
SOLID,WAX MAY BE RECOVERED AS ANY OTHER MATERIAL.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:STORE AWAY FROM OPEN FLAME.BOILERS AND
STRONG OXIDANTS SUCH AS LIQUID CL*2,NA AND SODIUM HYPOCHLORITE.KEEP
TIGHTLY CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT WITH EYES,SKIN AND CLOTHES;AVOID
BREATHING DUST.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR DUST.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONG CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MSDS REVISED DATE:2/84.
Chemical Properties
HCC:N1
Spec Gravity:0.93
Evaporation Rate & Reference:NIL
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE OR AMBER SOLID HAVING LITTLE OR NO ODOR.
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:NONE NOTED
Disposal
Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.