Product ID:LIGROINE(PRACT),P513
MSDS Date:01/01/1985
FSC:6810
NIIN:00-903-3950
MSDS Number: BFVSG

Emergency Phone: 716-722-5151

Info Phone: 716-722-5151

Cage: 19139

Telephone: 716-722-5151/(800) 242-2424

Cage: 19139

NAPHTA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: >99%

OSHA PEL 100 PPM

Effects of Overexposure:EYES/SKIN:MAY CAUSE DISCOMFORT;ING:HARMFUL IF
SWALLOWED;INH:CAUSES DISCOMFORT,NAUSEA,DIZZ,ETC.

First Aid:SKIN/EYES:FLUSH W/LARGE AMT OF WATER.GET MED ATTN IF
IRRITATION OCCURS IN EYES;INH:REMOVE TO FRESH AIR.GIVE CPR IF
NEEDED;INH;GIVE WATER OR MILD.DO NOT INDUCE VOMITING.TRANSPORT TO
HOSPITAL AS SOON AS POSSIBLE.

Flash Point:APPROX 20F-CC
Lower Limits:0.9%
Upper Limits:6.0%
Extinguishing Media:CO*2,DRY CHEMICALS,FOAM
Fire Fighting Procedures:USE SELF-CONTND BREATHING APPARATUS

Spill Release Procedures:ELIM IGN SOURCES.EVACUATE UPROTECTED
PERSONS.PROVIDE VENT.USE PROTECTV EQUIP;SMALL STILL ABSORB
W/COMMERCIAL ABSORVETN & PLACE IN COVERED CONTAINERS;LG SPILL:DIKE
SPILLED AREA-PUMP LIQUID TO SALVAGE T ANK.SHOVEL UP RESIDUE INTO
COVERD DRUMS.

Handling and Storage Precautions:KEEP IN TIGHTLY CLOSED
CONTAINERS.STOREAWAY FROM IGNITION SOURCES.AVOID PHYSICAL DAMAGE.
Other Precautions:AVOID BREATING VAPORS.

Respiratory Protection:NIOSH APPROVED RESPIRATIORS.
Ventilation:MECHANICAL GENERAL
Protective Gloves:IMPERVIOUS
Eye Protection:CHEM/SAFETY GOGGLES
Other Protective Equipment:AS NECESSARY TO PREVENT SKIN CONTACT
Supplemental Safety and Health
MFR PRODUCT CATALOG # IS P513,WHICH IS PRACTICAL GRADE;MSDS FM MFR NOT
RECVD.DATA ESTABLISHED BY DGSC-STF TO UPDATE PREVIOUS ENTRIES OF
HMIS;MSDS FM MFR STILL REQD TO UPDATE THE ENTRIES.

HCC:F2
Boiling Pt:B.P. Text:APPROX 210F
Vapor Pres:UNK
Vapor Density:<1.0
Spec Gravity:UNK
Evaporation Rate & Reference:<1(SLWR THAN ETHR)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WATER WHITE CLEAR LIQUID
Percent Volatiles by Volume:UNK

Stability Indicator/Materials to Avoid:YES
CORROSIVE & OXIDIZING MATERIALS.
Stability Condition to Avoid:SOURCE OF IGNITION
Hazardous Decomposition Products:CO,CO*2
Conditions to Avoid Polymerization:UNK

Waste Disposal Methods:KEEP IN COVERED DRUMS/CONTNRS PENDING
DISPOSAL.DESTROY LIQUID BY INCINERATION IAW EXISTING RECS;HANDLE &
DISPOSE IN FULL COMPLIANCE W/ALL FEDERAL & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.