BFVTS - D-3 CURING SOLUTION FOR DIMECOTE 3
- MSDS: BFVTS
- Manufacturer: AMERON PROTECTIVE COATINGS DIV
- Product Name: D-3 CURING SOLUTION FOR DIMECOTE 3
- National Stock Number: 8010-00-904-3890
Product Identification
Product ID:D-3 CURING SOLUTION FOR DIMECOTE 3
MSDS Date:01/01/1985
FSC:8010
NIIN:00-904-3890
MSDS Number: BFVTS
Responsible Party
BREA, CA 92621-3904
US
Cage: 0Y2E4
Contractor
Telephone: 714-529-1951
Cage: 0Y2E4
Ingredients
ACETONE (SARA III)
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 30%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 25%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
PHOSPHORIC ACID (SARA III)
CAS: 7664-38-2
RTECS: TB6300000
Fraction By Weight: 20%
OSHA PEL 1 MG/M3/3 STEL
ACGIH TLV: 1 MG/M3/3 STEL; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
D1-N-BUTYL AMINE
CAS: 111-92-2
RTECS: HR7780000
Fraction By Weight: 15%
Hazards
Effects of Overexposure:INHALATION:NAUSEA,DIZZINESS,HEADACHE,POSS
BURNS.IRRITATING TO SKIN,EYES AND MUCOUS MEMBRANES
First Aid
First Aid:INHALATION:PROVIDE FRESH AIR,IF BREATHING IS LABORED GIVE
ARTIFICIAL RESPIRATION.CONTACT:WASH SKIN WITH SOAP AND
WATER,EYES:FLUSH WITH WATER FOR 15 MIN AND GET MEDICAL ATTN.LAUNDER
CONTAMINATED CLOTHI NG BEFORE REUSE.
Fire Fighting
Flash Point:2F(CC)
Lower Limits:2.6
Upper Limits:12.8
Extinguishing Media:DRY CHEMICAL,CARBON DIOXIDE
Fire Fighting Procedures:BLANKET FLAMES WITH ONE OF ABOVE EXTINGUISHING
MEDIA
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION.USE
ABSORBENT CLEAN-UP MATERIALS.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED.STORE IN COOL
DRY WELL VENTILATED AREA.
Other Precautions:AVOID PROLONGED BREATHING OF VAPOR OR CONTACT WITH
SKIN.IN CONFINED AREAS,OR TANKS USE EXPLOSION AND SPARK PROOF
EQUIPMENT INCLUDING NONSPARKING SHOES AND TOOLS.
Exposure Controls
Respiratory Protection:AIRLINE HOOD RESPIRATOR IN CONFINED AREAS OR
TANKS(MFR RECOMMEND)
Ventilation:LOCAL EXHAUST
Protective Gloves:NEOPRENE
Eye Protection:MASK OR GOGGLES
Supplemental Safety and Health
ONE PART PRODUCT MANUFACTURED IN BOTH FLAM OR NON-FLAM SOLUTION.BOTH
CONFORM TO SPEC.KEY1:F3.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:134F
Vapor Pres:180
Vapor Density:2-4
Spec Gravity:0.96
Evaporation Rate & Reference:5.6 (BU ACETATE)
Solubility in Water:COMPLETE
Appearance and Odor:WATERY LIQUID,BLUE-GREEN TINT,SOLVENT ODOR
Percent Volatiles by Volume:71.8
Stability
Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS,ACIDS,OXIDIZING AGENTS
Stability Condition to Avoid:OPEN FLAME,ARC OR SPARK
Hazardous Decomposition Products:CARBON DIOXIDE,CARBON MONOXIDE,OXIDES
OF PHOSPHORUS.
Disposal
Waste Disposal Methods:IN SEPARATE CLOSED METAL CONTANER IN ACCORDANCE
WITH ALL APPLICABLE REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.