BFWTX - AUTOBODY FILLER
- MSDS: BFWTX
- Manufacturer: FIBRE GLASS EVERCOAT CO
- Product Name: AUTOBODY FILLER
- National Stock Number: 8010-00-926-2135
Product Identification
Product ID:AUTOBODY FILLER
MSDS Date:01/01/1985
FSC:8010
NIIN:00-926-2135
Kit Part:Y
MSDS Number: BFWTX
Responsible Party
CINCINNATI, OH 45242-2033
US
Emergency Phone: 800-543-4530
Info Phone: 513-489-7600
Cage: 18731
Contractor
Telephone: 513-489-7600
Cage: 18731
Ingredients
BENZOYL PEROXIDE(45%)
CAS: 94-36-0
RTECS: DM8575000
Fraction By Weight: 2.0%
ACGIH TLV: 5 MG/CUM
STYRENE, MONOMER (SARA III)
CAS: 100-42-5
RTECS: WL3675000
Fraction By Weight: 13.0%
OSHA PEL 100 PPM
ACGIH TLV: S,50PPM/100STEL;9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TALC
RTECS: VV7720000
Fraction By Weight: 58.0%
ACGIH TLV: 20 MPPCF
POLYESTER RESIN
Fraction By Weight: 27%
Hazards
Effects of Overexposure:OBJECTIONABLE ODOR;EYE AND NASAL IRRITATION.
LOW-DIZZ.&DRUNKENESS.HIGH LEVEL-ANESTHESIA
First Aid
First Aid:EYE & SKIN-FLUSH RPOMPTLY W/PLENTY OF H*2O,GET MED ATT.INH
-PROMPTLY REMOVE TO FRESH AIR,GET MED ATT. INGESTION-NO KNOWN
ANTIDOTE*TREAT SYMPTOMATICALLY,GET MEDICAL ATTENTION.SKIN-REMOVE
CONTAMINATED C LOTHING WASH W/SOAP & WATER.
Fire Fighting
Flash Point:98 F CC
Extinguishing Media:WATER FOG,FOAM,CO*2,DRY CHEMICAL
Unusual Fire/Explosion Hazard:AT ELEVATED TEMP,SUCH AS FIRE
CONDITIONS,POLYMERIZTION MAY TAKE PLACE,CONTAINED POSS.VIOLENT
RUPTUR
Accidental Release
Spill Release Procedures:COVER SPILL W/ABSORBENT AGENT.SCRAPE UP, CLEAN
SPILL AREA W/SOLVENT
Handling
Handling and Storage Precautions:CONTROL TEMPERATURE IN STORAGE BELOW
80F. DO NOT USE NEAR FIRE OR FLAME.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED PROTECTION FOR EXPOSURE
OF CONCERN
Ventilation:MECHANICAL(GENERAL)-DOWN DRAFT MECH EXHST.NO LOCAL NEEDED
Protective Gloves:NEOPRENE,NONSOL
Eye Protection:CHEM WORKERS GOGGLES.
Supplemental Safety and Health
VAPOR IS 1.1 TIMES HEAVIER THAN AIR AT 100 F AND HAZ AN IGNITION
TEMPERATURES OF 914 F. CONFORMS TO SPEC TT-F-322D, AMEND 1.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:293 F
Vapor Pres:4.5
Vapor Density:3.6
Spec Gravity:1.74
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY PASTE,AROMATIC ODOR.
Percent Volatiles by Volume:12.0
Stability
Stability Indicator/Materials to Avoid:YES
ORGANIC PEROXIDES
Stability Condition to Avoid:DO NOT STORE AT TEMPERATURES ABOVE 80F
Hazardous Decomposition Products:CO & CO*2
Conditions to Avoid Polymerization:DO NOT STORE AT TEMPERATURES ABOVE
80F
Disposal
Waste Disposal Methods:INCINERATE IN PROPERLY DESIGNED FURNACE.COMPLY
W/FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.