BFYSQ - MIL-C-22750*COATING,EPOXY-POLYAMIDE
- MSDS: BFYSQ
- Manufacturer: KOPPERS CO INC
- Product Name: MIL-C-22750*COATING,EPOXY-POLYAMIDE
- National Stock Number: 8010-00-948-6733
Product Identification
Product ID:MIL-C-22750*COATING,EPOXY-POLYAMIDE
MSDS Date:01/01/1987
FSC:8010
NIIN:00-948-6733
Kit Part:Y
MSDS Number: BFYSQ
Responsible Party
PITTSBURGH, PA 15219-1818
US
Cage: 80592
Contractor
Cage: 80592
Ingredients
N-BUTANOL
RTECS: EK8750000
ACGIH TLV: 50PPM
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM/150STEL;9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYL ISOBUTYL KETONE (HEXONE) (SARA III)
CAS: 108-10-1
RTECS: SA9275000
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM/75 STEL; 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
OSHA PEL 200 PPM; Z-2
ACGIH TLV: S, 50 PPM; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ISOPROPANOL
RTECS: NT4370000
ACGIH TLV: 400PPM
Hazards
Effects of Overexposure:IRRI TO EYES NOSE THROAT NEAR ABOVE 200PPM.SKIN
IRRI CAN CAUSE DROWSINESS,DIZZINESS, COMA.
First Aid
First Aid:FRESH AIR GIVE ART RESP CALL DOCTOR. FOR EYES,WATER FLUSH AND
CONTACT DOCTOR WASH SKIN. WASH CLOTHES BEFORE REUSE.
Fire Fighting
Flash Point:45 F TCC 7 C TCC
Extinguishing Media:WATER FOG CO2 OR DRY CHEMICAL
Fire Fighting Procedures:USE AIR SUPPLIED EQUIPMENT FOR ENCLOSED
AREAS,COOL EXPOSED
Accidental Release
Spill Release Procedures:RECOVER ALL POSSIBLE. WIPE UP WITH
RAGS,SAWDUST,ETC. AVOID EXPOSURES TO SPARKS,FIRE OR HOT METAL
SURFACES.
Handling
Handling and Storage Precautions:CLOSE CONTAINERS AVOID FLAMES,OPEN
LIGHTS,WELDING,SMOKING,SPARKS.
Other Precautions:MAINTAIN GOOD PERSONAL HYGIENE, DO NOT USE IN
CONFINED AREA. TANK OR PIT WITHOUT ADEQUATE VENTILATION.
Exposure Controls
Respiratory Protection:ORG VAPOR CAN WHEN AIR CONTENT ADEQUATE AND
VAPOR CONC LESS 2% OR US
Ventilation:LOCAL EXHAUST AND MECHANICAL
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Supplemental Safety and Health
*THIS PROUDCT IS A TWO-COMPONENT COATING. ANY MIXTURE OF COMPONENTS
WILL HAVE THE HAZARDS OF BOTH COMPONENTS.
Chemical Properties
HCC:F2
Vapor Density:HEAV
Spec Gravity:SEESUP
Evaporation Rate & Reference:MODERATELY FAST
Solubility in Water:NA
Appearance and Odor:VISCOUS LIQUID WITH STRONG SOLVENT ODOR
Percent Volatiles by Volume:57.8
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:NO
Disposal
Waste Disposal Methods:INCINRATE OR USE APPROPRIATE BURIAL AREA.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.