BFZBD - "AD" PER MIL-L-23398 (LUBRICANT,SOLID FILM)
- MSDS: BFZBD
- Manufacturer: KAL GARD COATINGS AND MGF CORP
- Product Name: "AD" PER MIL-L-23398 (LUBRICANT,SOLID FILM)
- National Stock Number: 9150-00-954-7422
Product Identification
Product ID:"AD" PER MIL-L-23398 (LUBRICANT,SOLID FILM)
MSDS Date:01/01/1987
FSC:9150
NIIN:00-954-7422
MSDS Number: BFZBD
Responsible Party
SEPULVEDA, CA 91343-6106
US
Emergency Phone: NONE
Cage: 9G654
Contractor
Telephone: 818-894-3615
Cage: 9G654
Ingredients
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
RESIN
PIGMENT
ACGIH TLV: 0.5MG/CUM
LUBRICANT (SEE SUPP DATA)
ACGIH TLV: 10 MG/CUM
Hazards
Effects of Overexposure:EYES:IRRIT,BURN,DAMAGE;SKIN:IRRIT,DRYING,
DERMATITIS;INHAL:RESP.TRACT IRRIT,HEADACH,NAUSEA;LEAD POISO
First Aid
First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.
Fire Fighting
Flash Point:<100F/38C
Extinguishing Media:CO2,DRY CHEMICAL,OR FOAM
Fire Fighting Procedures:USE WATER FOG TO COOL CONTAINERS;USE SCBA IN
CONFINED AREA.
Unusual Fire/Explosion Hazard:VAPORS CAN FLOW TO IGNITION SOURCES AND
FLASH BACK.
Accidental Release
Spill Release Procedures:USE PROPER PERSONAL PROTECTION;USE SUITABLE
INERT ABSORBENT & RECOVER FOR PROPER DISPOSAL.
Handling
Handling and Storage Precautions:STORE IN COOL,DRY AREA.AVOID OPEN
FLAMES, HEAT & SPARKS.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES.DO NOT BREATHE
VAPORS/ MIST.WASH THOROUGHLY AFTER EACH USE;THIS PRODUCT CONTAINS
SMALL AMOUNT OF LEAD WHICH IS POISON.GOOD PERSONAL HYGIENE IS
ESSENTIAL.
Exposure Controls
Ventilation:LOCAL EXHAUST TO MAINTN BELOW TLV.
Protective Gloves:NEOPRENE
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
MSDS DATED:07-24-86;INGRED:STABILIZER;#3,4,5 AND 6 ARE AS TRADE
SECRETS;TLV FOR STABILIZER-0.15 MG/CUM.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:>78F/25.6C
Vapor Pres:>43
Vapor Density:>1.0
Spec Gravity:1.572
Evaporation Rate & Reference:<1.0 (ETHER=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:GRAY LIQUID;SOLVENT
Percent Volatiles by Volume:75
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS,STRONG ACIDS
Stability Condition to Avoid:HEAT,SPARKS,OPEN FLAMES
Hazardous Decomposition Products:COMBUSTION;CO,CO2
Disposal
Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.