BFZSM - R SCRATCH REMOVER
- MSDS: BFZSM
- Manufacturer: 3M COMPANY PRINTING AND PUBLISHING SYSTEMS DIV
- Product Name: R SCRATCH REMOVER
- National Stock Number: 6850-00-965-2488
Product Identification
Product ID:R SCRATCH REMOVER
MSDS Date:10/11/1988
FSC:6850
NIIN:00-965-2488
MSDS Number: BFZSM
Responsible Party
ST PAUL, MN 55144-1000
US
Emergency Phone: 612-733-1110
Info Phone: SAME
Cage: 76381
Contractor
Telephone: 866-556 5712 / 612-733-1110
Cage: 76381
Ingredients
STODDARD SOLVENT
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 20-30%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM; 9293
SODIUM SILICATE
CAS: 6834-92-0
RTECS: VV9275000
Fraction By Weight: 5-10%
POTASSIUM HYDROXIDE (SARA III)
CAS: 1310-58-3
RTECS: TT2100000
Fraction By Weight: 1-5%
OSHA PEL C, 2 MG/M3
ACGIH TLV: C 2 MG/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 50-60%
Hazards
LD50 LC50 Mixture:NONE GIVEN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITANT, CORROSIVE
Effects of Overexposure:EYE:IRRITATION, BURNS ON PROLONGED EXPOSURE.
SKIN:SEVERE IRRITATION, BURNS, DAMAGE IF EXPOSURE SEVERE.
INHALATION:IRRITATION, KIDNEY & CNS EFFECTS. HEADACHE, DIZZINESS,
NAUSEA, VOMITING, UNCONSCIOUSNE SS.
Medical Cond Aggravated by Exposure:ANY PRE-EXISTING SENSITIVITY OR
ALLERGY OR ORGAN DYSFUNCTION.
First Aid
First Aid:EYE:FLUSH 10-15 MIN WITH AMPLE WATER. SKIN:FLUSH 10-15 MIN
WITH AMPLE WATER. INHALATION:REMOVE VICTIM TO FRESH AIR. GIVE
OXYGEN OR ARTIFICIAL RESPIRATION AS REQUIRED. INGESTION:DO NOT
INDUCE VOMITING. IF CONSCIOUS, GIVE TWO GLASSES WATER OR MILK.
NOTHING BY MOUTH IF UNCONSCIOUS. CALL PHYSICIAN IMMEDIATELY ALL
EXPOSURES.
Fire Fighting
Flash Point Method:PMCC
Flash Point:103F/39C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:OBSERVE ALL PRECAUTIONS GIVEN. REMOVE ALL
SOURCES EXCESS HEAT & IGNITION. STOP LEAKS, CONFINE SPILL, COLLECT
WITH ABSORBENT AND PLACE IN CLOSABLE CONTAINER. WASH DOWN SPILL
AREA W/MILD DETERGENT SOLUT ION.
Handling
Handling and Storage Precautions:STORE IN COOL AREA. KEEP CONTAINERS
CLOSED.
Exposure Controls
Respiratory Protection:NONE GIVEN.
Ventilation:USE ONLY WITH ADEQUATE VENTILATION.
Protective Gloves:NATURAL RUBBER
Eye Protection:CHEMICAL SAFETY GOGGLES
Other Protective Equipment:NONE
Work Hygienic Practices:AVOID EYE,SKIN CONTACT. DO NOT INHALE OR
INGEST. LAUNDER WORK CLOTHING BEFORE REUSE.
Supplemental Safety and Health
UPDATE PER 3M MSDS DOC#10-3213-5 DATED 11OCT88. 3M GENERIC ID# IS
77-98XX-XXXX-X. PER DLSC TIR: CANCELLED 81115 !
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:203F/95C
Spec Gravity:0.96
pH:12.5
Viscosity:488 CPS
Solubility in Water:EMULSION
Appearance and Odor:MILKY WHITE LIQUID, SLIGHT SOLVENT ODOR.
Percent Volatiles by Volume:90
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS
Stability Condition to Avoid:EXCESS HEAT & IGNITION SOURCES.
Hazardous Decomposition Products:CARBON OXIDES, SILICA DUSTS, KOH
MISTS.
Disposal
Waste Disposal Methods:RECLAIM OR INCINERATE IAW ALL LAWS &
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.