BGBKW - 1545 ROSIN FLUX

  • MSDS: BGBKW
  • Manufacturer: KESTER SOLDER
  • Product Name: 1545 ROSIN FLUX
  • National Stock Number: 3439-00-982-6897
Product Identification

Product ID:1545 ROSIN FLUX
MSDS Date:01/01/1987
FSC:3439
NIIN:00-982-6897
MSDS Number: BGBKW

Responsible Party
KESTER SOLDER
515 E TOUHY
DES PLAINES, IL 60018-2675
US

Emergency Phone: 312-699-5594

Info Phone: 312-699-5594

Cage: GO345

Contractor
KESTER SOLDER DIVISION OF LITTON SYSTEMS, INC.
DES PLAINES, IL 60018 US

Telephone: 847-297-1600

Cage: 75297

Ingredients

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 69%.

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


ROSIN,CAS.#8050-09-7

Fraction By Weight: 30%.


MFR. INDICATES-ROSIN MAY DECOMPOSE DURING HEATING TO EMIT

RTECS: 9999999ZZ

Hazards

Effects of Overexposure:EYES:IRRITATES;INHAL:MAY INDUCE TRANSIENT
NARCOSIS, IRRITAT; SKIN: MAY CAUSE ALLERGIC RASH

First Aid

First Aid:EYES:FLUSH IMMEDIATELY W/PLENTY OF WATER; A DILUTE ETHANOL
SOLUTION CAN BE USED TO REMOVE ROSIN. SKIN:WASH W/SOAP &
WATER.;INGEST REMOVE TO FRESH AIR - GIVE O*2/CPR AS SITUATION
DICTATES. INGEST:INDUC E VOMITING.

Fire Fighting

Flash Point:65F/18.3C TOC
Autoignition Temp:Autoignition Temp Text:720F
Lower Limits:2.5
Upper Limits:15.
Extinguishing Media:CARBON DIOXIDE, ALCOHOL FOAM, DRY CHEMICAL.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:AUTO-IGNITION TEMP. IS 720F.

Accidental Release

Spill Release Procedures:WEAR PROPER PROTECTIVE EQUIPMENT. REMOVE
IGNITION SOURCES.WIPE UP IMMEDIATELY BY SOAKING UP INTO INERT
ABSORBENT MATERIAL. CLEAN UP W/ALKALI DETERGENT. PLACE IN APPROVED
DISPOSAL CONTAINER.

Handling

Handling and Storage Precautions:STORE AWAY FROM IGNITION SOURCES.

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:NONE REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED FOR TASK & HAND.
Supplemental Safety and Health
MSDS DATE:9/4/85

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:170F/76.7C
Vapor Pres:40.
Vapor Density:1.8
Spec Gravity:0.875
Evaporation Rate & Reference:(CCL+4 = 1), 0.3
Solubility in Water:70.%
Appearance and Odor:AMBER LIQUID W/ALCOHOL ODOR
Percent Volatiles by Volume:75.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:SMALL AMOUNT OF TURPENTINE
Conditions to Avoid Polymerization:WILL NOT POLYMERIZE

Disposal

Waste Disposal Methods:DISPOSE IAW ESTABLISHED FEDERAL,STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.