BGBLK - PR-1201-Q

Product Identification

Product ID:PR-1201-Q
MSDS Date:01/01/1985
FSC:8030
NIIN:00-983-5062
MSDS Number: BGBLK

Responsible Party
PRODUCTS RESEARCH & CHEMICAL CORP.
5430 SAN FERNANDO ROAD
GLENDALE, CA 91209
US

Emergency Phone: 818-240-2060

Info Phone: 818-240-2060

Cage: DO563

Contractor
PRODUCTS RESEARCH & CHEMICAL
1800 GLENDALE, CA 91209 US

Telephone: 818-240-2060

Cage: DO563

Ingredients

POLYSULFIDE POLYMER

Fraction By Weight: 50%


PIGMENTS

Fraction By Weight: 35%


RESINS PLASTICIZERS

Fraction By Weight: 3%

ACGIH TLV: UNK


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5%

OSHA PEL 200 PPM; Z-2

ACGIH TLV: S, 50 PPM; 9394

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:BASE COMPOUND MAY BE IRRITATING TO SKIN,EYES.

First Aid

First Aid:SKIN:WASH THOROUGHLY WITH SOAP AND WATER.EYES:FLUSH
THOROUGHLY WITH LARGE AMOUNTS OF WATER.INGESTION:INDUCE
VOMITING.INHALATION:REMOVE TO FRESH AIR.GIVE CPR/OXYTEN IF
NECESSARY.GET MEDICAL ATTENTION.

Fire Fighting

Flash Point:>73F PMCC
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:FOAM,DRY CHEMICAL,CARBON DIOXIDE
Fire Fighting Procedures:WEAR AIR-SUPPLIED RESPIRATOR WHILE FIGHTING
FIRES.
Unusual Fire/Explosion Hazard:EMISSION OF TOXIC VAPORS.

Accidental Release

Spill Release Procedures:STOP LEAK AT SOURCE.ELIMINATE IGNITION
SOURCES.ABSORB EXCESS WITH RAGS,PAPER TOWELS OR OTHER ABSORBENT
MATERIAL.CLEAN AREA WITH XYLENE OR TOLUENE.PLACE IN CLOSED
CONTAINERS.

Exposure Controls

Supplemental Safety and Health
ITEM IS CLASS 2 UNDER MIL SPEC 8516.

Chemical Properties

HCC:F3
Spec Gravity:1.7
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PINKISH-BROWN SYRUP;SLIGHT TOLUENE ODOR.
Percent Volatiles by Volume:6

Stability

Stability Indicator/Materials to Avoid:YES
DECOMPOSES WHEN EXPOSED TO STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID IGNITION SOURCES
Hazardous Decomposition Products:OXIDES OF SULFUR;HYDROGEN
SULFIDE;FORMIC ACID

Disposal

Waste Disposal Methods:PLACE ABSORBED MATL IN CLOSED CONTAINERS AND
DISPOSE IN ACCORDANCE WITH LOCAL,STATE AND FEDERAL REGULATIONS.DO
NOT INCINERATE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.