BGBWF - "FA" PER MIL-L-8937D
- MSDS: BGBWF
- Manufacturer: KAL GARD COATING AND MFG CORP
- Product Name: "FA" PER MIL-L-8937D
- National Stock Number: 9150-00-985-7255
Product Identification
Product ID:"FA" PER MIL-L-8937D
MSDS Date:11/12/1990
FSC:9150
NIIN:00-985-7255
MSDS Number: BGBWF
Responsible Party
SEPULVEDA, CA 91343-6106
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 818-894-3615
Preparer: NOT READABLE
Cage: 9G654
Contractor
Telephone: 714-370-3921/FAX824-0341 ALL WRONG#
Cage: 0HF19
Ingredients
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: 4.90%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 4.90%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
MOLYBDENUM DISULFIDE
CAS: 1317-33-5
RTECS: QA4697000
Fraction By Weight: 29.2%
ANTIMONY (SARA III)
CAS: 7440-36-0
RTECS: CC4025000
Fraction By Weight: 18.2%
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG SB/M3; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
BASIC LEAD PHOSPHITE
CAS: 12141-20-7
Fraction By Weight: 6.60%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:SEVERE PAIN AND CONJUNCTIVAL
IRRITATION, POSSIBLE CORNEAL DAMAGE. SKIN:SEVERE PAIN AND
IRRITATION, POSSIBLE BURNS AND MARKED DERMATITIS.
INHALATION:RESPIRATORY SYSTEM IRRITATION AND POSSIBLE PULM ONARY
EDEMA.
Effects of Overexposure:EYES:EXCESS TEAR PRODUCTION, BLINKING, AND
EXCESS REDNESS. SKIN:POSSIBLE SKIN BURNS, EXCESS REDNESS AND
SWELLING MAY RESULT. INHALATION:BURNING SENSATION OF EYES, NOSE AND
THROAT, CHEST DISCOMFORT, SN EZING, COUGHING, NAUSEA, CNS SYMPTOMS,
CYANOSIS. INGESTION:PAIN IN THE THROAT, CHEST, AND ABDOMEN WITH CNS
SYMPTOMS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:IMMEDIATELY FLUSH WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 15 MIN. WHILE HOLDING EYELIDS OPEN. SKIN:REMOVE CONTAMINATED
CLOTHING. WASH SKIN THOROUGHLY WITH SOAP AND WATER.
INHALATION:REMOVE VICTI M TO FRESH AIR AND RESTORE BREATHING
IFNECESSARY. INGESTION:IF VICTIM IS CONSCIOUS, GIVE MILK, EGG
WHITES, VEGETABLE OIL IF AVAILABLE. DO NOT INDUCE VOMITING. CONTACT
A PHYSICIAN IMMEDIATELY.
Fire Fighting
Flash Point:22.0F,-5.6C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:USE WATER SPRAY OR FOG TO COOL FIRE-EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:VAPORS CAN FLOW TO IGNITION SOURCES AND
FLASHBACK.
Accidental Release
Spill Release Procedures:REMOVE HEAT AND IGNITION SOURCES; VENTILATE
AREA; CLEAN UP WITH INERT ABSORBANT. AVOID DISCHARGE TO SEWERS,
SOIL AND WATERWAYS. WEAR PROTECTIVE EQUIPMENT.
Handling
Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED,LOW
FIRE RISK AREA. PROTECT FROM PHYSICAL DAMAGE.KEEP CONTAINERS
CLOSED. MAINTAIN STRICT HYGIENE FOR CHEM HANDLING.
Other Precautions:PER MFR,THIS PRODUCT CONTAINS SMALL AMOUNTS OF LEAD
WHICH IS CUMULATIVE POISON.AVOID SKIN,EYES,CLOTHING CONTACT.RMV &
LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.AVOID OPEN FLAMES.
Exposure Controls
Respiratory Protection:WEAR NIOSH-APPROVED RESPIRATOR FOR ORGANIC
VAPORS.
Ventilation:LOCAL EXHAUST TO ELIMINATE MISTS/FUMES/GASES.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:FULL PROTECTIVE CLOTHNG,STEEL-TOED
SHOES,WORK GLOVES
Work Hygienic Practices:GOOD PERSONAL HYGIENE IS ESSENTIAL.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:171F,77C
Melt/Freeze Pt:M.P/F.P Text:LIQUID
Vapor Pres:>43
Vapor Density:>1
Spec Gravity:.82
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:APPRECIABLE
Appearance and Odor:GRAY LIQUID; SOLVENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZERS
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:COMBUSTION MAY PRODUCE OXIDES OF
CARBON & SULFUR
Conditions to Avoid Polymerization:THE PRODUCT, AS SOLD, DOES NOT
POLYMERIZE; HOWEVER, CONTAMINATION CAUSED BY THE USER MAY RESULT IN
POLYMERIZATION.
Disposal
Waste Disposal Methods:INCINERATE IN APPROVED INCINERATOR OR DISPOSE OF
IN APPROVED CHEMICAL DUMP IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.