BGBYC - STYRENE
- MSDS: BGBYC
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: STYRENE
- National Stock Number: 6810-00-987-4126
Product Identification
Product ID:STYRENE
MSDS Date:11/01/1976
FSC:6810
NIIN:00-987-4126
MSDS Number: BGBYC
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 716-722-2121
Cage: 19139
Contractor
Telephone: 716-722-5151/(800) 242-2424
Cage: 19139
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
Effects of Overexposure:INHAL-VAPOR CONC>400 PPM-IRRITATION.
EYE-LIQ/CONC VAPOR CAUSES IRRITATION. SKIN-PROLONGED/REPEATED
CONTACT MAY CAUSE IRRITATION.
First Aid
First Aid:INHAL-GET TO FRESH AIR;GIVE ARTIFICIAL RESPIR/OXYGEN IF
NEEDED;CALL PHYSICIAN. EYES-FLUSH W/WATER 15 MIN. SKIN-REMOVE
CONTAM CLOTH;WASH AREA THOROUGHLY W/SOAP & WATER.
Fire Fighting
Flash Point Method:TCC
Flash Point:86F/30C
Lower Limits:1.1
Upper Limits:6.1
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM.
Fire Fighting Procedures:USE AIR MASK.
Unusual Fire/Explosion Hazard:MODERATE.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES IGNITION;USE PROTECT
CLOTH;ABSORB SPILLED MATL W/VERMICULITE.PLACE IN FIBER CARTON.
INCINERATE. WASH SPILL AREA WELL W/SOAP & WATER.
Handling
Handling and Storage Precautions:STORE IN COOL PLACE. WASH THOROUGHLY
AFTER HANDLING.
Exposure Controls
Respiratory Protection:PORTABLE BREATH APPARATUS OR AIR-LINE RESPIRATOR
FOR EMERGENCY.
Ventilation:LOCAL OR MECHANICAL.
Protective Gloves:YES
Eye Protection:YES
Other Protective Equipment:AS NECESSARY TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:294F/145C
Vapor Pres:5
Vapor Density:3.6
Spec Gravity:0.909
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS,OILY LIQUID,PENETRATING ODOR.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
COPPER,COPPER ALLOYS,PEROXIDE CATALYSTS.
Stability Condition to Avoid:NONE GIVEN.
Hazardous Decomposition Products:NONE GIVEN.
Conditions to Avoid Polymerization:HEAT & LIGHT.
Disposal
Waste Disposal Methods:MIX W/FLAM SOLVENT IF NECESSARY TO REDUCE
VISCOSITY. SPRAY INTO INCINERATOR. STATE & LOCAL LAWS TAKE
PRECEDENCE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.