BGCTH - 101 6690,DURAFLO RT DEVELOPER STARTER
- MSDS: BGCTH
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: 101 6690,DURAFLO RT DEVELOPER STARTER
- National Stock Number: 6750-01-005-6771
Product Identification
Product ID:101 6690,DURAFLO RT DEVELOPER STARTER
MSDS Date:06/26/1984
FSC:6750
NIIN:01-005-6771
MSDS Number: BGCTH
Responsible Party
ROCHESTER, NY 14650
US
Emergency Phone: 716-722-5151
Info Phone: 716-722-5151
Cage: 19139
Contractor
Telephone: 716-722-5151/(800) 242-2424
Cage: 19139
Ingredients
ACETIC ACID (SARA III)
CAS: 64-19-7
RTECS: AF1225000
Fraction By Weight: 27.5%
OSHA PEL 10 PPM
ACGIH TLV: 10 PPM/15 STEL; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
AQUEOUS SOLUTION,NON-HAZARDOUS,UNIDENTIFIED COMPONENTS(WT%
Fraction By Weight: 75.2%
Hazards
Effects of Overexposure:EYES,SKIN,MUCOUS MEMBRANES:MAY CAUSE
BURNS;INGEST:PAIN,VOMIT;INHALE:SHORT BREATH,COUGH,IRRTNT.
First Aid
First Aid:EYES,SKIN,MUCOUS MEMBRANES:FLUSH W LG AMTS H*2O AT LEAST 15
MIN;INHALE:REMOVE TO FRESH AIR,KEEP CALM;INGEST:RINSE MOUTH,DRINK
EXCESS WATER,DO NOT INDUCE VOMIT.GET IMMEDIATE MEDICAL ATTENTION
FOR EYES, INGEST,INHALE,OR SKIN BURNS.
Fire Fighting
Extinguishing Media:NOT COMBUSTIBLE:USE MEDIA SUITABLE FOR ADJACENT
FIRE.
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP;WATER SPRAY COOL
CONTAINERS.
Unusual Fire/Explosion Hazard:CONTAINERS MAY RUPTURE IN HEAT OF FIRE.
ACID SOLUTION;AVOID PHYSICAL CONTACT.
Accidental Release
Spill Release Procedures:DO NOT TOUCH SPILLED MATERIAL.WEAR PROTECTIVE
EQUIPMENT.STOP LEAK IF POSSIBLE WITHOUT RISK.SM SP:ABSORB W
COMMERCIAL ABSORBENT & PUMP IN APPR CONTAINERS.LG SP:CONTAIN W DIKE
& TRANSFER TO APPR CONTAIN ERS(SOLUTION IS ACID).
Handling
Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
AREA; PROTECT FROM PHYSICAL DAMAGE & AVOID CONTACT WITH SKIN (ACID
SOLUTION).AVOID CONTACT WITH ALKALIES.
Other Precautions:REMOVE & WASH CONTAMINATED CLOTHING. MAINTAIN STRICT
HYGIENE.
Exposure Controls
Respiratory Protection:FOR VAPOR EXPOSURE, USE APPR ORGANIC VAPOR
RESPIRATOR.
Ventilation:ADEQUATE TO ELIMINATE FUMES:MECHANICAL(GEN/LOCAL EXHAUST).
Protective Gloves:IMPERVIOUS/RUBR
Eye Protection:SAFETY/CHEM GOGGLES.
Other Protective Equipment:FULL WORK CLOTHING; FACE SHIELD WHEN USING
PRODUCT.
Supplemental Safety and Health
MSDS FROM MANUFACTURER DATED 12-9-75. PH APPROX 1.0. KEY1:J6.
Chemical Properties
HCC:C2
Boiling Pt:>100.C, 212.F
Vapor Pres:32
Vapor Density:0.96
Spec Gravity:1.20
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS AQUEOUS MIXTURE; VINEGAR ODOR.
Percent Volatiles by Volume:83.0
Stability
Stability Indicator/Materials to Avoid:YES
CORROSIVE TO PB,MOST METALS,FORMS HYDROGEN;AVOID AKLAKIES
Stability Condition to Avoid:VAPOR GENERATING CONDITIONS.
Hazardous Decomposition Products:NONE NOTED,BUT VAPORS FROM PRODUCT ARE
NOXIOUS
Disposal
Waste Disposal Methods:DISPOSE IN FULL ACCORD WITH ALL APPLICABLE
INTERNATIONAL, FEDERAL, STATE, & LOCAL REGULATIONS.MFG NOTES THAT
PRODUCT MAY BE FLUSHED DOWN SEWER WITH COPIOUS AMOUNTS OF WATER.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.