Product ID:2200118
MSDS Date:01/01/1985
FSC:6850
NIIN:01-039-3824
MSDS Number: BGGYT

Emergency Phone: 714-864-2310

Info Phone: 714-864-2310

Cage: 60777

Telephone: 909-864-2310

Cage: 60777

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 89.0%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

Effects of Overexposure:STORE THROAT,COUGHING,SHORTNESS OF
BREATH,HEADACHE,IRRITATES SKIN, CORROSIVE TO EYES.,ABDOMINAL PAIN

First Aid:INHALATION:FRESH AIR,REST,& CALL A DR.SKIN:REMOVE
CONTAMINATED CLOTHES,RINSE SKIN WITH PLENTY OF WATER OR SHOWER &
CALL A DR IF NECESSARY.EYES:RINSE WITH PLENTY OF WATER THEN SEE
DR.INGESTION:RINSE MO UTH,GIVE PLENTY OF H*2O TO DRINK SEE DR

Flash Point:40F
Extinguishing Media:CO*2,DRY CHEMICAL FOR SMALL FIRES.LG FIRES: ALCOHOL
FOAM.
Fire Fighting Procedures:DILUTION OF BURNING LIQUID W/22-25 VOLUMES OF
WATER.SPRY H*2
Unusual Fire/Explosion Hazard:ISOPROPYL ALCOHOL VAPOR AIR MIXTURES ARE
EXPLOSIVE

Spill Release Procedures:COLLECT LEAKING LIQUID IN SEALABLE
CONTAINERS,ABSORB SPILLED LIQUID IN SAND OR INERT ABSORBENT &
REMOVE TO SAFE PLACE.ELIMINATE ALL SOURCES OR IGNITION.SMALL SPILLS
MAY BE FLUSHED W/LARGE QUANTITIES O F WATER.LARGE SPILLS SHOULD BE
COLLECTEDFOR DISP

Handling and Storage Precautions:KEEP AWAY FROM HEAT,SPARKS & OPEN
FLAME.KEEP CONTAINER CLOSED.USE WITH ADEQUATE VENTILATION.DO NOT
TAKE INTERNALLY.FOR INDUSTRY USE ONLY.
Other Precautions:WEAR SAFETY GLASSES,RUBBER GLOVES,A FACE
SHIELD,COVERALLS, & A MULTIPURPOSE GAS MASK.

Respiratory Protection:AIR-SUPPLIED MASKS IN CONFINED AREAS.
Ventilation:LOCAL EXHAUST IS PREFERRED & MECHANICAL IS ACCEPTABLE
Protective Gloves:RUBBER/VINYL
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:EYE BATH & SAFETY SHOWER.
Supplemental Safety and Health
ITEM COMBUSTION IS IN PERCENT BY VOLUME.

HCC:F2
Boiling Pt:B.P. Text:179.6F
Vapor Pres:44
Vapor Density:2.1
Spec Gravity:0.79
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR COLORLESS LIQUID,ISOPROPYL ALCOHOL ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS & CORROSIVES.
Stability Condition to Avoid:AVOID HEAT,SPARKS & OPEN FLAMES.
Hazardous Decomposition Products:CO*2,CO.

Waste Disposal Methods:ATOMIZE INTO AN INCINERATOR WHERE PERMITTED
UNDER APPROPRIATE FEDERAL,STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.