BGJJM - M200

  • MSDS: BGJJM
  • Manufacturer: HUGHSON CHEMICALS
  • Product Name: M200
  • National Stock Number: 8030-01-054-7226
Product Identification

Product ID:M200
MSDS Date:01/01/1985
FSC:8030
NIIN:01-054-7226
MSDS Number: BGJJM

Responsible Party
HUGHSON CHEMICALS

Emergency Phone: (814) 868-3641

Cage: GO815

Contractor
HUGHSON CHEMICALS
10038 POMONA, CA 91768-3301 US

Telephone: 714-623-3835

Cage: GO815

Ingredients

METHYL N-BUTYL KETONE (2-HEXANONE)

CAS: 591-78-6

RTECS: MP1400000

Fraction By Weight: 79.8%

OSHA PEL 100 PPM

ACGIH TLV: S, 5 PPM; 9293

Hazards

Effects of Overexposure:INTOXICATION EFFECT FROM AROMATIC SOLVENT
VAPORS.

First Aid

First Aid:WASH SKIN THOROUGHLY; IF SWALLOWED DO NOT INDUCE VOMITING!
CALL PHYSICIAN.

Fire Fighting

Lower Limits:1.2
Upper Limits:8.0
Extinguishing Media:FOAM, DRY CHEMICAL CO*2,
Fire Fighting Procedures:VAPORS EVOLVED WHEN HEATED ARE SKIN IRRITANT.
AVOID CONTACT.
Unusual Fire/Explosion Hazard:FIRE HAZARD - DANGEROUS RATED WHEN
EXPOSED TO HEAT OR FLAME.

Accidental Release

Spill Release Procedures:AVOID PROLONGED BREATHING OF VAPORS: REMOVE
SOURCES OF IGNITION; CLEAN UP SPILL IN MANNER FOR ANY STANDARD
FLAMMABLE PAINT.

Handling

Handling and Storage Precautions:NORMAL STORAGE FOR FLAMMABLE LIQUIDS.

Exposure Controls

Respiratory Protection:POSITIVE AIR VENT. AIR SUPPLIED HOOD OR CHEM
CANISTER FACE MASK.
Protective Gloves:YES
Eye Protection:YES
Other Protective Equipment:AS REQUIRED TO AVOID PROLONGED SKIN CONTACT.
Supplemental Safety and Health
PART B FOR TWO OTHER PRODUCTS (CHEMGLAZE M213 & CHEMGLAZE M313)KEY1:F4.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:256 RO 266F
Vapor Pres:10
Vapor Density:3.45
Spec Gravity:0.8400
Evaporation Rate & Reference:1.0 (N-BUAC)
Solubility in Water:MODERATE
Appearance and Odor:CLEAR YELLOW LIQUID; KETONE ODOR
Percent Volatiles by Volume:82.8

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO & CO*2

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FED., STATE & LOCAL
REGULATIONS FOR FLAMMABLE MATERIALS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.