BGJJY - WD-40 SPRAY CANS 12 OZ.

  • MSDS: BGJJY
  • Manufacturer: WD 40 CO
  • Product Name: WD-40 SPRAY CANS 12 OZ.
  • National Stock Number: 9150-01-054-8665
Product Identification

Product ID:WD-40 SPRAY CANS 12 OZ.
MSDS Date:01/01/1985
FSC:9150
NIIN:01-054-8665
MSDS Number: BGJJY

Responsible Party
WD-40 CO

Emergency Phone: 714-275-1400

Cage: JO960

Contractor
WD-40 COMPANY
80607 SAN DIEGO, CA 92138-0607 US

Telephone: 619-275-1400

Cage: 09137

Ingredients

STODDARD SOLVENT

CAS: 8052-41-3

RTECS: WJ8925000

Fraction By Weight: >50%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM; 9293


PETROLEUM BASE OIL

Fraction By Weight: >15%


LPG (LIQUEFIED PETROLEUM GAS)

CAS: 68476-85-7

RTECS: SE7545000

Fraction By Weight: 25.0%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192

Hazards

Effects of Overexposure:EYES/SKIN:IRRIT. INH:ANESTH/HDCH/DIZZ/NAUS/RESP
IRRIT. ING:NAUS/DIARR/BOMIT. ASP-LUNGS:CHEM PNEUMON.

First Aid

First Aid:EYES:FLUSH W/WATER FOR 15 MINS, REMOVE CONTACT LENSES IF
WORN. SKIN:WASH W/SOAP & WATER, APPLY SKIN CREAM. INH:REMOVE TO
RESH AIR, GIVE ARTIFICIAL RESP IF NEC, OR O*2. ING:DO NOT INDUCE
VOMITING. CALL A PHYSICIAN.

Fire Fighting

Lower Limits:1.80
Upper Limits:9.50
Extinguishing Media:CO*2, DRY CHEM, FOAM
Unusual Fire/Explosion Hazard:CONSIDERED EXTREMELY FLAMMABLE UNDER
CONSUMER PROD SAFETY COMMISSION REG

Accidental Release

Spill Release Procedures:SPILLS UNLIKELY FROM SPRAY CANS. LEAKING CANS
SHOULD BE PLACED IN PLASTIC BAG OR OPEN PAIL UNTIL PRESSURE HAS
DISSIPATED, THEN TREAT AS STODDARD SOLVENT.

Handling

Handling and Storage Precautions:KEEP FROM SOURCES OF IGNITION. DO NOT
TAKE INTERNALLY. AVOID EXCESSIVE INH OF SPRAY PARTICLES. DO NOT
STORE ABOVE 120F.
Other Precautions:DO NOT INCINERATE OR PUNCTURE CNTNRS

Exposure Controls

Respiratory Protection:NONE
Ventilation:SUFFICIENT TO KEEP SOLVENT VAPOR LESS THAN TLV
Supplemental Safety and Health
PROD CONTAINS PROPRIETARY CORROSION INHIBITORS & WETTING AGENTS THAT
ARE INDICATED BY MFR TO BE HAZ. VAP DNSTY >1. VAP PRESS IS 50PSIG.

Chemical Properties

HCC:V3
Spec Gravity:0.710
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT AMBER LIQ, CHARACTERISTIC ODOR
Percent Volatiles by Volume:80.0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATL
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:EMPTY SPRAY CANS SHOULD NOT BE PUNCTURED OR
INCINERATED. LIQ SHOULD BE TREATED AS STODDARD SOLVENT & DISPOSED
OF IAW LOCAL, STATE, FED REG.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.