Product ID:0151,EPOXY PATCH KIT
MSDS Date:03/17/1987
FSC:8040
NIIN:01-066-6442
MSDS Number: BGKCG

HYSOL DIV DEXTER CORP

15051 E DON JULIAN RD
INDUSTRY, CA 91749
US

Emergency Phone: 510-687-4201

Info Phone: 818-968-6511

Cage: 12405

DEXTER CORP DEXTER ELECTRONIC MATERIALS DIV

LA PUENTE, CA 91746 US

Telephone: 818-968-6511

Cage: 12405

SILICA, AMORPHOUS, DUST

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <5%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3; 8990

TRIETHYLENETETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: <30%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MATERIAL IS CORROSIVE TO SKIN. MAY
CAUSE CHEMICAL BURNS TO SKIN & EYES. REPEAT CONTACT MAY CAUSE
SENSITUZATION.
Explanation of Carcinogenicity:NOT APPLICABLE
Effects of Overexposure:SKIN RASH/IRRITATION,POSSIBLE BURNS.
Medical Cond Aggravated by Exposure:NOT APPLICABLE

First Aid:EYE:IMME FLUSH W/LGE AMTS OF WTR FOR AT LEAST 15MIN.
SKIN:WASH SKIN W/SOAP & WTR,RUBBING ALCOHOL,/HAND CLEANER. DO NOT
USE SOLVENTS. IF IRRITATION PERSIST,SEE PHYSICIAN.
INHALATION:REMOVE FROM E XPOSURE. SUPPORT BREATHING (GIVE
O*2/ARTIFICIAL RESPIRATION). INGESTION:CALL MD IMMEDIATELY.

Flash Point:265F/129.4C
Lower Limits:N/ESTABLISHD
Upper Limits:N/ESTABLISHD
Extinguishing Media:DRY CHEMICAL/HALON FIRE EXTINGUISHER,/WTR
SPRY,FOAM/FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:DENSE SMOKE & TOXIC GASSES MAY BE
LIBERATED

Spill Release Procedures:SCRAPE UP & TRANSFER TO METAL CONTAINER. WIPE
UP REMAINING RESIDUE W/SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS,/USE DETERGENT
Neutralizing Agent:N/K

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE W/LABEL
INSTRUCTIONS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST & MECHANICAL VENTILATION ARE RECOMMENDED.
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:AS NEEDED TO PROTECT SKIN & CLOTHING
Supplemental Safety and Health
PCT VOLT-VOL:N.PH:N. COND TO AVOID (POLYM) BOND. FAILURE TO OBSV CAUT
MAY RSULT IN EXCESS HEAT BLD-UP W/RLEAS OF TOX GAS. KEY1:J1.

HCC:B2
Boiling Pt:B.P. Text:531F277.2C
Melt/Freeze Pt:M.P/F.P Text:N/APPLICABL
Decomp Temp:Decomp Text:N/K
Vapor Pres:<0.01
Vapor Density:>1
Spec Gravity:0.98
pH:N/-FP
Evaporation Rate & Reference:<0.01(BUAC)
Solubility in Water:APPROX 20%
Appearance and Odor:AMBER COLORED LIQUID W/SLIGHT AMMONIACAL ODOR
Percent Volatiles by Volume:N/K-FP
Corrosion Rate:

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS/MINERAL ACIDS
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:CO, NO*X,ALDEHYDES,ACIDS &
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXNG RSIN & CURNG AGENT IN
BATCH >1 LB TOTL.DO NOT HEAT MXD ADHES ABV 1501/65.6C UNLESS CURNG
SURF TO BE(SUP DAT)

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED BY DOT DISPOSE OF AS ORM-E. DISPOSAL
METHOD CAN BE LAND BURIAL/CHEMICAL INCINERATION(MFR).DISPOSE OF IAW
LOCAL,STATE, & FE DERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.