BGKWC - G351

  • MSDS: BGKWC
  • Manufacturer: GE SILICONES
  • Product Name: G351
  • National Stock Number: 9150-01-080-9652
Product Identification

Product ID:G351
MSDS Date:01/04/1990
FSC:9150
NIIN:01-080-9652
MSDS Number: BGKWC

Responsible Party
GE SILICONES
260 HUDSON RIVER RD
WATERFORD, NY 12188
US

Emergency Phone: 518-237-3330

Info Phone: 518-237-3330

Preparer: DA POLISINELLI

Cage: GESIL

Contractor
GENERAL ELECTRIC SUPPLY CO.
27607 RICHMOND, VA 23261 US

Telephone: 804-358-4941

Cage: 9A544

Ingredients

STEARIC ACID, LITHIUM SALT; (LITHIUM STEARATE)

CAS: 4485-12-5

RTECS: WI4370000

Fraction By Weight: 10-30%

OSHA PEL N/K

ACGIH TLV: N/K


DIMETHYL DIPHENYL POLYSILOXANE; (METHYLPHENYLPOLYSILOXANE)

CAS: 68083-14-7

Fraction By Weight: 60-80%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INGESTION: NONE KNOWN. SKIN:
IRRITATION IS NOT EXPECTED, BUT MAY OCCUR IN CERTAIN SENSITIVE
INDIVIDUALS. INHALATION: DUST HAZARD MAY BE CREATED IF, UNDER
CONDITIONS OF USE, SOLID PARTICLES ARE SEPARATED FROM THE
POLYMERIC MATRIX. EYES: MAY IRRITATE EYES. CHRONIC: RESPIRATORY
AILMENTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:INGEST: RINSE MOUTH W/WATER SEVERAL TIMES. SKIN: REMOVE
CONTAMD CLTHG & LAUNDER BEFORE REUSE. WASH W/SOAP & WATER. TO CLEAN
FROM SKIN, REMOVE COMPLETELY W/DRY CLOTH OR PAPER TOWEL, BEFORE
WASHING W/DE TERGENT & WATER. INHAL: MOVE TO FRESH AIR. EYES:
IMMEDIATELY FLUSH EYES W/PLENTY OF WATER FOR AT LEAST 15 MINUTES &
GET MEDICAL ATTENTION IF IRRITATION PERSISTS.

Fire Fighting

Flash Point Method:COC
Flash Point:>500F,>260C
Extinguishing Media:ALL STANDARD FIREFIGHTING MEDIA.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:WIPE, SCRAPE OR SOAK UP IN AN INERT MATERIAL
AND PUT IN A CONTAINER FOR DISPOSAL. WASH WALKING SURFACES WITH
DETERGENT & WATER TO REDUCE SLIPPING HAZARD. WEAR PROPER PROTECTIVE
EQUIPMENT AS SPECIFIED IN PROTECTIVE EQUIPMENT SECTION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTACT WITH EYES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE KNOWN. USE NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NONE KNOWN.
Protective Gloves:CLOTH GLOVES.
Eye Protection:ANSI APPRVD SAFETY GLASSES .
Other Protective Equipment:LAB COAT. EYEWASH STATIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:V6
Spec Gravity:1.04 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE TO TAN SOLID; ODORLESS.
Percent Volatiles by Volume:<1

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
SILICON DIOXIDE.

Disposal

Waste Disposal Methods:DISPOSAL SHOULD BE MADE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.