BGLHJ - 16440-GRAY

  • MSDS: BGLHJ
  • Manufacturer: PRATT AND LAMBERT
  • Product Name: 16440-GRAY
  • National Stock Number: 8010-01-088-0104
Product Identification

Product ID:16440-GRAY
MSDS Date:01/01/1985
FSC:8010
NIIN:01-088-0104
MSDS Number: BGLHJ

Responsible Party
PRATT & LAMBERT
16116 E 13TH ST
WICHITA, KS 67201
US

Cage: PRATT

Contractor
PRATT AND LAMBERT INC
2153 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 25%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300STEL;9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


CYCLOHEXANONE (SARA III)

CAS: 108-94-1

RTECS: GW1050000

Fraction By Weight: 15%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15 - 20%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: <5.0%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


MINERAL SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: >0.5%

ACGIH TLV: 500 PPM

Hazards

Effects of Overexposure:IRRIT OF NOSE,THROAT,EYES & POSS DIZZINESS &
NAUSEA.SPRAY MIST CONTN LEAD.

First Aid

First Aid:INHAL:REMOVE FR EXPOSR & PROVID FRESH AIR.SPLASH EYES-FLUSH
IMMED W/LG AMTS OF WATER FOR 15 MIN.SPLASH SKIN:REMOV CONTAM
CLOTHING & WASH ALL AFFECT AREA W/WATR.INGEST:DO NOT IMDUC VOMITNG.
CONSULT A D R. IMMED IN ALL CASES.

Fire Fighting

Flash Point:21F, -6C
Extinguishing Media:CLASS B EXTING, CARBON DIOXIDE, DRY CHEM OR ALCOHOL
FOAM
Fire Fighting Procedures:SELF CONTAMINED BREATH APPARAT,WATER MAY BE
INEFECTIVE.
Unusual Fire/Explosion Hazard:KEEP CONTNRS TIGHTLY CLOS.ISOLAT FR
HEAT,ELECTR EQPMT,SPARKS & OPN FLAME.DO NOT APPLY TO VRY HOT SUR

Accidental Release

Spill Release Procedures:REMOV ALL SOURCES OF IGNIT(FLAMES,HOT
SURFACES,ELECTRICAL,STATIC OR FRICTIONAL SPARKS).VENTILAT AREA &
AVOID BREATHING VAPORS.REMOV W/INERT ABSORB & NON-SPARKING
TOOLS.STEPS MUST BE TAN TO PREVNT CONT AM OF GROUND WATR OR STREAMS

Handling

Handling and Storage Precautions:DO NOT STORE ABOV 120F.STORE LG
QUANTITIES IN COMPLIA W/OSHA 1910.106.CONTNRS SHLD BE GROUNDED &
BONDED TO THE REC4EIVING CONTNR.
Other Precautions:DO NOT CUT OR WELD ON EMPTY CONTAINER. DO NOT USE
UNTIL ALL SAFETY PRECAUTIONS HAVE BEEN READ & FULLY UNDERSTOOD BY
THE USER.

Exposure Controls

Respiratory Protection:NIOSH APPRVD MECH RESPIRAT TO REMOV OVERSPRAY
WHN SPRAYING IN OUTDR
Ventilation:PROVID GEN DILUT/LOC EXHAUST VENT TO KP CONCENT BELO ACEP
TL
Protective Gloves:SOLVENT,IMPERME
Eye Protection:SAFETY EYEWR
Other Protective Equipment:PROTECTV EQPMT TO PRVNT SKN CONTCT.SE
OSHA,29 CFR 1910.1025
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:174-321F
Vapor Density:>AIR
Evaporation Rate & Reference:Percent Volatiles by Volume:69

Stability

Stability Indicator/Materials to Avoid:YES
AVOIE CONTCT W/STRONG ACIDS OR AKALINE MATERIALS
Stability Condition to Avoid:FIRES, HEAT & HOT SURFACES.
Hazardous Decomposition Products:BURNING WILL PRODUCE SMOKE & OXIDES OF
CARBON & LEAD
Conditions to Avoid Polymerization:DO NOT ADD DRIERS OR REACTIV CHEM
W/O TECHN SUPERVISION.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORD W/LOCAL,STATE & FEDERAL
REGULATIONS.INCINERATIN EPA APAPRVD FACILITY.DO NOT INCINERAT
CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.