BGLYG - BOWMAN INSECT KILLER
- MSDS: BGLYG
- Manufacturer: BOWMAN DISTRIBUTION BARNES GROUP INC
- Product Name: BOWMAN INSECT KILLER
- National Stock Number: 6840-01-104-0780
Product Identification
Product ID:BOWMAN INSECT KILLER
MSDS Date:01/01/1985
FSC:6840
NIIN:01-104-0780
MSDS Number: BGLYG
Responsible Party
CLEVELAND, OH 44101
US
Cage: 05575
Contractor
Telephone: (216) 391-7200
Cage: 05575
Ingredients
PYRETHRUM (SARA III)
CAS: 8003-34-7
RTECS: UR4200000
Fraction By Weight: 3%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
PETROLEUM DISTILLATES (NAPHTHA OR RUBBER SOLVENT)
CAS: 8002-05-9
RTECS: SE7449000
Fraction By Weight: 81%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM; 8990
PIPERONYL BUTOXIDE TECH
CAS: 51-03-6
RTECS: XS8050000
Fraction By Weight: 6%
N-OCTYL BICYCLOHEPTENE DICARBOXIME
Fraction By Weight: 10%
Hazards
Effects of Overexposure:EYE/SKIN: IRRITATION
First Aid
First Aid:EYE:FLUSH WITH WATER 15 MINUTES. SKIN:WASH WITH SOAP & WATER.
INGESTION:SEE PHYSICIAN.
Fire Fighting
Flash Point:135F/57C (TCC)
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAIN BREATH APP, WATER FOG TO CLEAN
EXPOSED CONTAINE
Unusual Fire/Explosion Hazard:EXPOSURE TO HIGH TEMP (ABOVE 130F/54C)
MAY CAUSE CONTAINERS TO VENT,RUPTURE OR BURST.
Accidental Release
Spill Release Procedures:SECURE SOURCES OF IGNITION,PROVIDE ADEQUATE
VENTILATION. MOP UP SPILLED MATERIAL.
Handling
Handling and Storage Precautions:DO NOT HEAT OR STORE AT TEMPERATURES
EXCEEDING 120F/48C.
Other Precautions:KEEP OUT OF REACH OF CHILDREN, READ ENTIRE LABEL
BEFORE USING.
Exposure Controls
Ventilation:HOOD OR FAN
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
Chemical Properties
HCC:F5
Boiling Pt:B.P. Text:212F/100C
Vapor Pres:14
Vapor Density:2.0
Spec Gravity:0.96
Evaporation Rate & Reference:<1 (B. ACET)
Solubility in Water:INSOLUBLE
Appearance and Odor:VISCOUS EMULSION HAVING A PLEASANT ODOR
Percent Volatiles by Volume:90%
Stability
Stability Indicator/Materials to Avoid:NO
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:CO, CO*2,HYDROGEN CHLORIDE,PHOSGENE
Disposal
Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.
DO NOT PUNCTURE OR INCINERATE CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.