BGMHH - HEATER ASSEMBLY SOLUTION

  • MSDS: BGMHH
  • Manufacturer: CHEMTRONICS INC
  • Product Name: HEATER ASSEMBLY SOLUTION
  • National Stock Number: 6665-01-112-1644
Product Identification

Product ID:HEATER ASSEMBLY SOLUTION
MSDS Date:01/01/1987
FSC:6665
NIIN:01-112-1644
MSDS Number: BGMHH

Responsible Party
CHEMTRONICS,INC.

Emergency Phone: 704 298-7941

Cage: EO089

Contractor
CHEMTRONICS,INC.
HAUPPAUGE, NY 11787 US

Telephone: 800-645-5244

Cage: EO089

Ingredients

CUPRIC CHLORIDE (SARA III)

CAS: 7447-39-4

RTECS: GL7000000

Fraction By Weight: 40%.

OSHA PEL 1 MG CU/M3

ACGIH TLV: 1 MG/M3

EPA Report Quantity: 10 LBS

DOT Report Quantity: 10 LBS


ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 20%.

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


WATER,CAS#7732-18-5/

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 40%.

Hazards

Effects of
Overexposure:EYE:IRR,IRIDOCYCL;SKIN:INTOX;INH:INTOX,DIZZ,LOSS
APETITE;ING:DIZZ,ABD.PAIN,3-4OZ CAUSE DEATH

First Aid

First Aid:INH:REMOVE TO FRESH AIR,GIVE CPR,O*2 IF NECESS;EYE:FLUSH
W/WTR AT LEAST 15 MIN;SKIN:WASH W/SOAP&WTR;ING:GIVE 2 GLASSES WTR
OR MILK&INDUCE VOMIT.SUPPORT RESP.IF NECESSARY

Fire Fighting

Flash Point:>212F,>100C
Extinguishing Media:DRY CHEM,ALC.FOAM.COOL CONT W/WTR.WTR/FOAM MAY
CAUSE FROTHIN
Fire Fighting Procedures:USE SCBA ON FIRES IN ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:ELIMINATE IGN.SOURCES.DO NOT BREATHE
VAPORS.USE VERMICULITE OR OTHER SUITABLE ABSORBENT TO ABSORB
SPILLS.REMOVE RESIDUE BY FLUSHING W/WTR.

Handling

Handling and Storage Precautions:1.DO NOT STORE W/OXIDIZING MTLS.
2.KEEP AWAY FROM SPARKS&FLAMES. 3.AVOID BREATHNG VAPORS. 4.AVOID
SKIN/EYE CONTACT.
Other Precautions:1.USE ONLY W/ADEQUATE VENITLATION. 2.NO SMOKING WHEN
HANDLING. 3.COMBUSTIBLE LIQUID.

Exposure Controls

Respiratory Protection:MESA APPVD RESP.W/ORG.VAPOR CANNISTER
Ventilation:PROVIDE MECHAN(GEN/LOCAL EXHAUST)VENT TO MAINTN Protective Gloves:RUBBER/NEOPRENE
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:NONE SPECIFIED
Supplemental Safety and Health
MSDS DATED 11/18/85/MELT PT 18F,-8C/SEE ADDL DATA IN TRANSP SECT FOR
PROD LOCATION/KEY1:N1.

Chemical Properties

HCC:F2
Vapor Density:>1.
Spec Gravity:1.
Evaporation Rate & Reference:<1(BU ACET=1)
Solubility in Water:COMPLETE
Appearance and Odor:DK GREEN W/ANTIFREEZE TYPE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGTS.
Stability Condition to Avoid:MIX W/INORG.AC.OF OXY-SULF.INCREASE
HT&PRESS.IN CLSD.CONT.
Hazardous Decomposition Products:INCOMPLETELY BURNED CARBON PRODUCTS,
CO*2, CO.

Disposal

Waste Disposal Methods:INCINERATE IN APPROVED INCINERATOR OR DISPOSE OF
IN APPROVED CHEMICAL DUMP IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.