BGMRD - 4404-2 TYPE S, TYPE S TONER PREMIX
- MSDS: BGMRD
- Manufacturer: VERSATEC(A XEROX CO)
- Product Name: 4404-2 TYPE S, TYPE S TONER PREMIX
- National Stock Number: 6850-01-120-0530
Product Identification
Product ID:4404-2 TYPE S, TYPE S TONER PREMIX
MSDS Date:01/01/1987
FSC:6850
NIIN:01-120-0530
MSDS Number: BGMRD
Responsible Party
SANTA CLARA, CA 95051
Emergency Phone: 716-422-2177
Info Phone: 800-828-6571
Cage: MO494
Contractor
Telephone: 800-828-6571
Cage: MO494
Ingredients
ISOPARAFFINIC PETROLEUM SOLVENT(CAS#64742-48-9)
Fraction By Weight: >95%
ACGIH TLV: 300 PPM
MOLYBDATED CARBON BLACK
ALUMIN STEARATE(CAS#637-12-7)
NEOCRY-VINYLTOLUGENE BUTYLMETHACRYLATE RESIN
BHT(BUTYLATED HYDROXYTOLUENE),(CAS#128-37-0)
Hazards
Effects of Overexposure:ING:MAX RISK OF SEVERE RESPIRATORY DISTRESS BY
ASPIRATION;INH:ABNORMAL HEART RYTHMS.RESPIR ARREST.
First Aid
First Aid:EYE:FLUSH W/COPIOUS AMOUNT OF WATER;SKIN:WASH WITH SOAP &
WATER;INHALE:REMOVE TO FRESH AIR,GIVE ARTIFICIAL RESPIRATION IF
NEEDED;ING:DILUTE STOMACH CONTENT WITH SEVERAL GLASSES OF WATER.
Fire Fighting
Flash Point:102-107F-TCC
Lower Limits:0.8
Upper Limits:0.1
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:AVOID WATER.IT TENDS TO SPREAD HYDROCARBON
SOLVENT FIRE.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.
Handling
Handling and Storage Precautions:AVOID HANDLING NEAR HEAT,STRONG
LIGHT,OPEN FLAMES & STRONG OXIDANTS.KEEP CONTAINERS TIGHTLY
CLOSED.STORE IN COOL,DRY,WELL VENTILATED AREA.
Other Precautions:AVOID BREATHING VAPORS.AVOID PROLONGED OR REPEATED
SKIN CONTACT; BOILING PT RANGE:160-177C; % VOLATILE RANGE:80-100%;
SPECIFIC GRAVITY RANGE:0.75-0.81.
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:NO SPECIAL REQUIREMENTS W ADEQUATE VENT.
Protective Gloves:NEOPRENE/NITRIL
Eye Protection:SAFETY GLASSES
Other Protective Equipment:TO AVOID PROLONGED/REPEATED CONTACT,USE
NEOPRENE/NITRILE GLV
Supplemental Safety and Health
MSDS DATED 9-30-86. "OTHER INGRED":ROSIN,DISPERSING AID & DYE.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:160-177C
Vapor Pres:1
Vapor Density:5.0
Spec Gravity:0.78
Evaporation Rate & Reference:<0.5(BU-ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK LIQUID.SLIGHT ODOR
Percent Volatiles by Volume:>80%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Stability Condition to Avoid:HEAT,SPARKS,OPEN FLAME,STRONG OXIDANTS.
Hazardous Decomposition Products:NONE NOTED,BUT EXPECT CO, CO*2, H*2O.
Disposal
Waste Disposal Methods:SM & LG SPILL:DEPOSIT IN A POSTED TOXIC
SUBSTANCE LANDFILL IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.