BGQWF - ISOPROPYL ALCOHOL TECH
- MSDS: BGQWF
- Manufacturer: VAN WATER AND ROGER
- Product Name: ISOPROPYL ALCOHOL TECH
- National Stock Number: 6810-01-220-9907
Product Identification
Product ID:ISOPROPYL ALCOHOL TECH
MSDS Date:05/01/1993
FSC:6810
NIIN:01-220-9907
MSDS Number: BGQWF
Responsible Party
SAN MATEO, CA 94403-2522
US
Emergency Phone: 800-424-9300
Info Phone: 714-864-2310
Preparer: C.A.EISENHARD
Cage: 09N91
Contractor
Telephone: 408-435-8700/800-424-9300(CHEMTREC)
Cage: 0AN91
Ingredients
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: >99%
OSHA PEL 400 PPM/500 STEL
ACGIH TLV: 400 PPM/500STEL;9192
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION-IRRITATION OF NOSE &
THROAT. EYES-IRRITATION, CORNEAL BURNS. PROLONGED EXPOSURE TO HIGH
CONCENTRATIONS MAY CAUSE SEVERE OR FATAL CNS DEPRESSION.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:INHALATION-HIGHER CONCENTRATIONS MAY CAUSE
HEADACHE, VOMITING, COMA. EVEN HIGHER CONCENTRATIONS MAY CAUSE COMA
OR DEATH. SKIN-DRYNESS, POSSIBLE DERMATITIS. INGESTION-LARGE
AMOUNTS CAUSES HEADACHE, NAU SEA, VOMITING, STOMACH CRAMPS,
UNCONSCIOUSNESS OR DEATH.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN DISORDERS, EYE
PROBLEMS, OR IMPAIRED RESPIRATORY FUNCTION MAY BE SUSCEPTIBLE.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION
IF NEEDED, SEEK MEDICAL ATTENTION. EYES: FLUSH WITH WATER FOR 15
MINUTES, GET MEDICAL ATTENTION. SKIN: WASH AREA WITH SOAP & WATER.
IF IRRI TATION PERSISTS, SEEK MEDICAL ATTENTION.INGESTION: INDUCE
VOMITING BY GIVING WATER, PREVENT ASPIRATION, GET IMMEDIATE MEDICAL
ATTENTION.
Fire Fighting
Flash Point Method:TCC
Flash Point:53.0F,11.7C
Lower Limits:2.0
Upper Limits:12.7
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, CARBON DIOXIDE, ALCOHOL
FOAM; DO NOT USE DIRECT WATER SPRAY.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS & FULL PROTECTIVE CLOTHING. USE WATER SPRAY TO
COOL NEARBY CONTAINERS & STRUCTURES THAT ARE EXPOSED.
Unusual Fire/Explosion Hazard:EXTINGUISH ALL NEARBY SOURCES OF IGNITION
BECAUSE VAPORS MAY BE MOVED BY AIR CURRENTS TO IGNITION SOURCES
DISTANT FROM THE HANDLING POINT.
Accidental Release
Spill Release Procedures:EXTINGUISH ALL IGNITION SOURCES. MAKE SURE ALL
HANDLING EQUIPMENT IS ELECTRICALLY GROUNDED. FOR SMALL SPILLS MOP
UP & PLACE IN D.O.T. APPROVED CONTAINERS.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
FLAMES. STORE IN COOL, DRY, WELL-VENTILATED PLACE AWAY FROM
INCOMPATIBLE MATERAILS. VENT CONTAINERS FREQUENTLY.
Other Precautions:MORE OFTEN IN WARM WEATHER, USE ONLY ON NON-SPARKING
TOOLS AND ELECTRICALLY GROUND ALL EQUIPMENT WHEN HANDLING THIS
PRODUCT. DO NOT USE PRESSURE TO EMPTY CONTAINERS. EMPTY CONTAINERS
CAN HAVE RESIDUES , GASES & MISTS.
Exposure Controls
Respiratory Protection:BASED UPON CONTAMINATION LEVELS IN THE WORK
PLACE. FOR EXAMPLE: HALF MASK AIR-PURIFYING CARTRIDGE RESPIRATORS
OR SUPPLIED AIR RESPIRATORS.
Ventilation:LOCAL-MECHNAICAL EXHAUST.
Protective Gloves:RUBBER GLOVES.
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:RUBBER APRON, RUBBER BOOTS, IMPERVIOUS
CLOTHING.
Work Hygienic Practices:EYE WASH FOUNTAIN, QUICK DRENCH SHOWER.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:181F,83C
Melt/Freeze Pt:M.P/F.P Text:-127F,-88C
Vapor Pres:33
Vapor Density:2.07
Spec Gravity:0.79
Evaporation Rate & Reference:3.0 (BUTYL ACETATE=1)
Solubility in Water:100%
Appearance and Odor:MEDICINAL ALCOHOLIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ALUMINUM, ACETALDEHYDE, CHLORINE, ETHYLENE OXIDE,
HYPOCHLOROUS ACID, ALDEHYDES.
Stability Condition to Avoid:HEAT, SPARKS AND OPEN FLAMES.
Hazardous Decomposition Products:MAY LIBERATE CARBON MONOXIDE AND
CARBON DIOXIDE.
Disposal
Waste Disposal Methods:CONSULT APPROPIATE FEDERAL, STATE AND LOCAL
REGULATORY AGENCIES TO ASCERTAIN PROPER DISPOSAL PROCEDURES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.