BGXGQ - DIESEL FUEL 1
- MSDS: BGXGQ
- Manufacturer: EXXON CO USA A DIV OF EXXON CORP
- Product Name: DIESEL FUEL 1
- National Stock Number: 9140-00-286-5286
Product Identification
Product ID:DIESEL FUEL 1
MSDS Date:12/02/1991
FSC:9140
NIIN:00-286-5286
MSDS Number: BGXGQ
Responsible Party
HOUSTON, TX 77252-2180
US
Emergency Phone: 713-656-3424
Info Phone: 713-656-5949
Cage: 29700
Contractor
Telephone: 713-656-5949 / 713-656-3424
Cage: 29700
Ingredients
KEROSENE (ALIPHATIC HYDROCARBON)
CAS: 8008-20-6
RTECS: OA5500000
Fraction By Weight: 100%
Hazards
LD50 LC50 Mixture:LD50 (ORAL RAT) IS EXPECTED > 5G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MILD EYE AND SKIN IRRITATION,
UPPER RESPIRATORY TRACT IRRITATION AND CENTRAL NERVOUS SYSTEM
EFFECTS, UNCONSCIOUSNESS AND DEATH. ASPIRATION INTO LUNGS AFTER
INGESTION MAY CAUSE SEVERE PULMONARY INJURY, POSSIBLY DEATH.
INJECTION OF PRODUCT UNDER SKIN MAY CAUSE SERIOUS TISSUE DAMAGE.
CHRONIC: DERMATITIS.
Explanation of Carcinogenicity:SIMILAR PRODUCTS USUALLY PRODUCED SKIN
CANCER IN LABORATORY MICE. DIESEL EXHAUST HAVE INCREASED CANCER IN
LAB ANIMALS.
Effects of Overexposure:EYE/SKIN: MILD IRRITATION. PROLONGED CONTACT
PRODUCES SKIN DRYNESS, IRRITATION. INHALATION: EYE AND RESPIRATORY
TRACT IRRITATION, HEADACHE, DIZZINESS, ANESTHESIA, DROWSINESS,
UNCONSCIOUSNESS, DEATH.
Medical Cond Aggravated by Exposure:SKIN CONTACT MAY AGGRAVATE AN
EXISTING DERMATITIS.
First Aid
First Aid:EYES: FLUSH WITH PLENTY OF WATER FOR 15 MINUTES. IF
IRRITATION PERSISTS, SEE DOCTOR. SKIN: REMOVE CONTAMINATED
CLOTHING, WASH WITH SOAP AND WATER. INJECTION: THIS IS A SERIOUS
MEDICAL EMERGENCY. SEE D OCTOR IMMEDIATELY REGARDLESS OF APPEARANCE
OR SIZE. INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN/CPR IF
NEEDED. SEE DOCTOR. INGESTION: DO NOT INDUCE VOMITING. SEE DOCTOR
IMMEDIATELY.
Fire Fighting
Flash Point Method:TCC
Flash Point:100F,38C
Autoignition Temp:Autoignition Temp Text:410F
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, DRY CHEMICAL
AND VAPORIZING LIQUID TYPE EXTINGUISHING AGENTS.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. EVACUATE AREA. COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:IF LEAK HAS NOT IGNITED USE WATER SPRAY
TO DISPERSE VAPORS AND PROVIDE PROTECTION TO FIREFIGHTERS. VAPORS
HEAVIER THAN AIR. CAN TRAVEL ALONG GROUND & FLASHBACK.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE AND
REMOVE WITH INERT ABSORBENT. USE NON-SPARKING TOOLS. FOR LARGE
SPILLS, CONTAIN WITH EARTHEN DIKE OR PETROLEUM ABSORBENT MATERIAL.
REMOVE WITH GROUNDED SUC TION PUMP.
Handling
Handling and Storage Precautions:CONTENTS ARE FLAMMABLE. KEEP AWAY FROM
HEAT, SPARKS, AND OPEN FLAME. DURING USE AND UNTIL ALL VAPORS ARE
GONE: KEEP AREA VENTILATED-DO NOT SMOKE.
Other Precautions:AVOID BREATHING OF VAPORS. LABORATORY TESTS ON
ANIMALS HAVE SHOWN THAT EXPOSURE CAN CAUSE SKIN TUMORS. ALWAYS
PROMPTLY WASH OFF ANY EXPOSED SKIN.
Exposure Controls
Respiratory Protection:WEAR A NIOSH/MSHA APPROVED RESPIRATOR IF
VENTILATION DOES NOT MAINTAIN INHALATION EXPOSURES BELOW PEL/TLV.
WEAR SELF-CONTAINED BREATHING APPARATUS IF REQUIRED FOR HIGH LEVELS
OF CONTAMINANTS.
Ventilation:GENERAL (MECHANICAL) OR LOCAL EXHAUST AS REQUIRED TO
PREVENT EXCEEDING RECOMMENDED EXPOSURE LIMITS.
Protective Gloves:NEOPRENE OR NATURAL RUBBER GLOVES.
Eye Protection:SPLASH GOGGLES OR FACESHIELD.
Other Protective Equipment:INDUSTRIAL-TYPE WORK CLOTHING, HAT AND APRON
AS REQUIRED. AN EYE WASH AND DRENCH SHOWER FACILITY SHOULD BE
AVAILABLE.
Work Hygienic Practices:MINIMIZE SKIN CONTACT AND BREATHING VAPORS.
WASH AFTER HANDLING. REMOVE AND LAUNDER CONTAMINATED CLOTHING.
Supplemental Safety and Health
KEEP CONTAINER CLOSED WHEN NOT IN USE. TRANSFER ONLY TO APPROVED
CONTAINERS WITH COMPLETE AND APPROPRIATE LABELING. DO NOT TAKE
INTERNALLY. "EMPTY" DRUMS OF THIS MATERIAL CAN BE DANGEROUS - AVOID
CUTT ING, WELDING, BRAZING, DRILLING ETC WHICH CAN CREATE HIGH
TEMPERATURES AND SPARKS.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:320F,160C
Melt/Freeze Pt:M.P/F.P Text:-30F,-34C
Vapor Pres:<5 @ 68F
Vapor Density:4.7
Spec Gravity:0.82
Viscosity:1.7 CST @104F
Evaporation Rate & Reference:0.04 (BUTYL ACETATE = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR WATER-WHITE LIQUID WITH MILD KEROSENE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS SUCH AS LIQUID CLHORINE, OXYGEN-RICH AIR,
SODIUM HYPOCHLORITE, CALCIUM HYPOCHLORITE, ETC.
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:INCOMPLETE COMBUSTION MAY PRODUCE
FUMES, SMOKE, CARBON MONOXIDE, ALDEHYDES, OTHER INCOMPLETELY BURNED
HYDROCARBONS.
Disposal
Waste Disposal Methods:WASTE MATERIAL MAY BE A HAZARDOUS WASTE (CODE
D001) WHICH MUST BE DISPOSED OF ACCORDINGLY. DO NOT INCINERATE
CLOSED CONTAINER. DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.