BGYTQ - 30/70
- MSDS: BGYTQ
- Manufacturer: J W HARRIS CO INC
- Product Name: 30/70
- National Stock Number: 3439-00F008818
Product Identification
Product ID:30/70
MSDS Date:02/01/1992
FSC:3439
NIIN:00F008818
MSDS Number: BGYTQ
Responsible Party
CINCINNATI, OH 45242
US
Emergency Phone: 513-891-2000
Info Phone: 513-891-2000
Cage: FO309
Contractor
Telephone: 513-891-2000
Cage: 27911
Ingredients
LEAD, INORGANIC LEAD (SUSPECTED HUMAN CARCINOGEN BY IARC,
CAS: 7439-92-1
RTECS: OF7525000
ACGIH TLV: 0.15 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
ZINC CHLORIDE
CAS: 7646-85-7
RTECS: ZH1400000
OSHA PEL 1 MG/CUM
ACGIH TLV: 1 MG/CUM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ROSIN CORE SOLDER PYROLYSIS PRODUCTS
TIN (AS SN)
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 30%
OSHA PEL 2 MG/CUM
ACGIH TLV: 2.0 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEVERE OVEREXPOSURE CAN CAUSE
PULMONARY EDEMA. PROLONGED INHALATION EXPOSURE MAY CAUSE
LUNG/KIDNEY DAMAGE. FUMES FROM ACID & ROSIN CORE CAN IRRITATE THE
NOSE & THROAT. ZINC CHLORIDE IN ACID CORE SOLDE R MAY IRRITATE THE
SKIN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: HEADACHE, NAUSEA, DIZZINESS, BODY
ACHES, ANEMIA, CHEST PAINS, COUGH, FEVER, SHORTNESS OF BREATH.
Medical Cond Aggravated by Exposure:IMPAIRED PULMONARY FUNCTION
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED
PERFORM CPR. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:NONFLAMMABLE
Unusual Fire/Explosion Hazard:NONFLAMMABLE. OPEN FLAMES & SPARKS CAN
IGNITE COMBUSTIBLES.
Handling
Handling and Storage Precautions:WASH HANDS THOROUGHLY BEFORE SMOKING
OR EATING & AFTER USING LEAD BEARING SOLDERS. TRAIN EMPLOYEE TO
KEEP HEAD OUT OF THE FUMES.
Exposure Controls
Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN SOLDERING IN CONFINED AREAS.
Ventilation:LOCAL EXHAUST AT THE FLAME TO KEEP THE FUMES & GASES BELOW
TLVS.
Protective Gloves:WELDER'S
Eye Protection:SAFETY GLASSES/GOGGLES/FACE SHIELD
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, APRONS, HATS,
SHOULDER PROTECTION, FACE SHIELD IF FILTER LENS OF APPROPRIATE
SHADES, SCREENS.
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE SMOKING OR EATING
& AFTER USING LEAD BEARING SOLDERS.
Supplemental Safety and Health
WEAR DARK SUBSTANTIAL CLOTHING. SOLDER FUMES CAN'T BE CLASSIFIED
SIMPLY. THE COMPOSITION & QUALITY ARE DEPENDANT UPON METAL BEING
SOLDERED, THE PROCESS, PROCEDURES & FILTER METALS USED, COATINGS,
NUMB ER OF OPERATORS, VOLUME OF WORK AREA & CONTAMINANTS IN THE
ATMOSPHERE.
Chemical Properties
Appearance and Odor:WIRE, SOLID GREY TO SILVER IN COLOR.
Stability
Stability Indicator/Materials to Avoid:YES
ZINC CHLORIDE: CYANIDES, SULFIDES,
Hazardous Decomposition Products:SOLDERING FUMES, ZINC CHLORIDE:
HYDROGEN CYANIDE GAS, HYDROGEN SULFIDE GAS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.