BGZHZ - POLYMER 1195
- MSDS: BGZHZ
- Manufacturer: BETZ LABORATORIES INC
- Product Name: POLYMER 1195
- National Stock Number: 6850-00F009075
Product Identification
Product ID:POLYMER 1195
MSDS Date:12/09/1988
FSC:6850
NIIN:00F009075
MSDS Number: BGZHZ
Responsible Party
TREVOSE, PA 19047
Emergency Phone: (215) 355-3300
Info Phone: (215) 355-3300
Preparer: HAROLD M. HERSH
Cage: 24774
Contractor
Telephone: 215-355-3300
Cage: 24774
Ingredients
NON-HAZARDOUS FOR INGREDIENTS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: SLIGHTLY IRRITATING,
REDNESS/ITCHING. EYE: SLIGHT IRRITATION. INHALATION: IRRITATION TO
UPPER RESPIRATORY TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: SLIGHTLY IRRITATING, REDNESS/ITCHING.
INHALATION: MAY CAUSE IRRITATION TO UPPER RESPIRATORY TRACT.
First Aid
First Aid:SKIN: REMOVE CONTAMINATED CLOTHING/BEFORE REUSE. WAS AREA
W/LARGE QTY OF SOAP SOLUTION/WATER FOR 15 MINS. EYE: FLUSH W/WATER
FOR 15 MINS. SEEK MED ATT. INHALATION: REMOVE VICTIM FROM
CONTAMINATED AREA TO FRESH AIR. INGESTION: DON'T FEED ANYTHING BY
MOUTH TO UNCONSCIOUS/CONVULSIVE VICTIM DILUTE CONTENTS OF STOMACH.
INDUCE VOMITING BY ONE OF THE STANDARD METHODS. CONTACT PHYSICIAN.
Fire Fighting
Flash Point Method:SCC
Flash Point:>200
Extinguishing Media:DRY CHEMICAL, CO2, FOAM, WATER.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR POSITIVE PRESSURE
SELF-CONTAINED BREATHING APPARATUS, FULL FACE-PIECE TYPE.
Unusual Fire/Explosion Hazard:FOAM/WATER CREAT A SLIPPERY CONDITION.
SPREAD SAND/GRIT.
Accidental Release
Spill Release Procedures:VENTILATE AREA, USE SPECIFIED PROTECTIVE
EQUIPMENT. CONTAIN & ABSORB ON ABSORBENT MATRIAL. PLACE IN WASTE
DISPOSAL CONTAINER. FLUSH AREA W/WATER. WET AREA MAY BE SLIPPERY.
IF SO, SPREAD SAND/GRIT.
Handling
Handling and Storage Precautions:KEEP DRUMS & PAILS CLOSED WHEN NOT IN
USE. PROTECT FROM FREEZING. REMOVE CONTAMINATED CLOTHING/WASH
BEFORE REUSE.
Other Precautions:USE NORMAL CHEMICAL HANDLING.
Exposure Controls
Respiratory Protection:USE RESPIRATORS WITHIN USE LIMITATIONS/ELSE USE
SUPPLIED AIR RESPIRATORS. IF VENTILATION IS INADEQUATE/SIGNIFICANT
PRODUCT EXPOSURE IS LIKELY, USE A RESPIRATOR W/DUST/MIST FILTERS.
Ventilation:PROVIDE ADEQUATE VENTILATION.
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Work Hygienic Practices:WASH OFF AFTER EACH USE. REMOVE CONTAMINATED
CLOTHING/LAUNDER BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:15F
Spec Gravity:1.152
pH:5.1
Evaporation Rate & Reference:(ETHER = 1): <1
Solubility in Water:100%
Appearance and Odor:AMBER, LIQUID, AMINE.
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:YIELDS ELEMENTAL OXIDES.
Disposal
Waste Disposal Methods:WATER CONTAMINATED W/THIS PRODUCT MAY BE SENT TO
SANITARY SEWER TREATMENT FACILITY, IN ACCORDANCE W/ANY LOCAL
AGREEMENT. INCINERATE/BURY IN APPROVED LANDFILL. NONHAZARDOUS UNDER
SARA SECTION 302, 313, 312 & RCRA.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.